Hose Crimping Machine (Standard 1/4 - 2 Inch)

The machine is designed for hoses from 1/4" to 2" nominal (approximately ID 6 mm to 51 mm). It ships with 10 sets of molds listed as 15, 19, 23, 26, 31, 36, 41, 47, 55 and 63 mm. For applications or mold sizes outside the stated crimping range, contact the manufacturer or supplier to confirm compatibility.

The machine requires a 380 V, 50 Hz, three-phase electrical supply.

The hydraulic system operates at up to 31.5 MPa (4500 PSI) and the unit delivers a crimping force of 40 tons.

The machine achieves high precision with an accuracy of ±0.01 mm, ensuring tight, consistent crimps.

The unit includes 10 sets of molds (sizes: 15, 19, 23, 26, 31, 36, 41, 47, 55, 63 mm). Additional accessories included may vary—confirm exact packing list with your supplier.

Overall dimensions are 940 mm × 690 mm × 1400 mm and the machine weight is approximately 295 kg.

It is ideal for manufacturing plants, automotive repair shops, hydraulic service centers, and construction or machinery workshops—any application that requires consistent hydraulic or industrial hose assemblies.

Follow the manufacturer’s manual. General safe steps: power off and isolate electrical supply, relieve hydraulic pressure, remove retaining fasteners, swap mold set, secure fasteners, then perform a test crimp. Only trained personnel should perform tooling changes.

Recommended maintenance includes regular inspection for hydraulic leaks, checking and topping hydraulic fluid per the manual, cleaning molds and tooling, checking fasteners and seals, and scheduling periodic service according to hours of operation. Consult the operator manual for specific intervals and procedures.

Wear appropriate PPE (gloves, eye protection), ensure the machine is properly grounded and mounted on a level surface, never operate with guards removed, relieve hydraulic pressure before maintenance, and ensure operators are trained in safe operation and emergency shutdown procedures.

At approximately 295 kg the machine is not intended for frequent relocation. It’s best installed on a stable, level workshop floor. Use appropriate lifting equipment for installation or movement.

The machine is built to crimp a wide range of hydraulic and industrial hose assemblies compatible with the supported ID range. Verify specific hose and fitting combinations with the manufacturer or by testing, as some specialty fittings or hose constructions may require custom molds or settings.

Cycle time depends on hose size, operator technique and setup. The machine’s 40-ton capacity and robust hydraulics support efficient production, but for exact cycle-time figures and production estimates request performance data or testing from the supplier.

Many suppliers offer spare parts and additional or custom molds. Contact your vendor or the manufacturer to order extra mold sets, spare hydraulic components, or bespoke tooling.

Warranty terms, certifications (CE, ISO, etc.) and after-sales support vary by supplier. Request the machine’s certification documents, warranty details and available training or service packages from your seller before purchase.