CNC Lathe Machine CK6180 by YZ CNC

The machine is listed with the GSK980TC3 CNC control (GSK series). Confirm with the supplier which software/version is pre-installed and whether additional options or language packs are available.

The spec sheet lists a three-gear gearbox giving speed ranges of 40–125 / 130–150 / 290–950 r/min. An earlier summary also mentioned 20–800 r/min; please confirm with the vendor which published range applies to the specific unit or variant you are buying.

Two values appear in the description: 11 kW (summary) and 15 kW (detailed spec). The detailed specification states 15 kW spindle power—confirm the exact motor rating for the machine you will receive.

Max swing over bed is 800 mm, max swing over cross slide 480 mm, and max turning length 1500 mm. The detailed spec lists the spindle bore as 110 mm (an earlier summary noted 105 mm), so please verify the spindle-bore dimension for your order.

The machine is fitted with a K11-320 three-jaw chuck. Turret dimensions are 240 × 240 mm. The spec lists 'turret indexing times 4.1'—please confirm whether this refers to indexing time (seconds) or number of index positions and the turret type (e.g., hydraulic or servo-driven) with the supplier.

Rapid traverse: X axis 4000 mm/min, Z axis 8000 mm/min. Minimum feed increment 0.001 mm. X-axis motor: 1.5 kW, 1500 r/min, 10 N·m torque. Z-axis motor: 3.5 kW, 1500 r/min, 18 N·m torque.

Positioning accuracy is specified as 0.02 mm with re-positioning (repeatability) of 0.01 mm. Actual achievable accuracy will depend on tooling, fixturing, cutting conditions, and machine setup.

Tailstock quill diameter is 100 mm with 250 mm travel and an MT6 taper. The summary noted manual, hydraulic, and pneumatic tailstock options—confirm which tailstock type is included or available as an option.

Overall size is listed as 2200 × 1705 × 1890 mm. Two different machine weights appear: 3500 kg (summary) and 10,000 kg (detailed spec). Foundation, anchoring and floor-loading requirements should be confirmed with the supplier; they will also advise required electrical supply and any pit or foundation work.

The datasheet does not specify supply voltage, phase or full electrical consumption. Confirm line voltage, phase (likely three-phase), main breaker/amperage, and any auxiliary power needs with the manufacturer or distributor.

The machine has a 240 × 240 mm turret; confirm the number and type of tool stations (e.g., square tooling, live tooling) and compatibility with tool holders you use. Optional live tooling, B-axis or bar-feeding equipment may be available—check with the vendor.

Yes—the machine is described as heavy-duty with a high-power spindle and robust construction suitable for turning steels, castings and large workpieces. Material removal rates will depend on tooling, spindle power, feeds/ speeds and fixturing.

Common options include different chucks, steady/rests, tailstock types (manual/hydraulic/pneumatic), coolant systems, chip conveyors, live tooling, bar feeders and protective enclosures. Ask the supplier about included accessories, lead times, spare parts availability and local service/support.

Warranty and commissioning policies vary by seller. Typical offerings include on-site installation, alignment, initial training, and a parts/warranty period. Confirm exact warranty length, response times for service, and whether operator/maintenance training is included.

Because the product text contains differing figures (e.g., spindle power, spindle bore, weight, speed ranges), request the official spec sheet and order confirmation from YZ CNC or their authorized dealer. Ask for serial-specific datasheets, test reports, and lead time, and request written confirmation of the exact configuration before purchase.