Hand-push Pile Cutter Concrete Pile Cutter Cement Pile Cutter

This is a hand-push concrete/cement pile cutter designed to cut concrete piles and similar precast concrete elements on site. It’s a mobile saw unit used to trim or shorten piles to the required length.

Cutting speed: 2700–5400 mm/min; motor power: 7.5 kW (copper wire motor); spindle speed: 1900 r/min; compatible saw blade diameter: 300–600 mm; size: 100 × 80 × 80 cm; weight: 150 kg.

It uses a pure copper-core 7.5 kW motor. Copper-core windings improve electrical conductivity, efficiency and heat dissipation, which increases work efficiency and durability.

The thickened water tank and integrated spray system provide consistent water to the cutting zone for cooling and dust suppression, which reduces blade wear, stabilizes cutting and lowers dust exposure.

The cutter accepts blades with diameters from 300 to 600 mm. Choose a blade rated for wet cutting of concrete/pile material and compatible with the spindle bore and RPM range (1900 r/min).

Yes — the saw blade mounting is designed for stable fixation and anti-shake performance. The machine also features an ergonomic, non-slip handle to reduce operator vibration and fatigue.

Safety features include a stable blade fixation to reduce vibration, an ergonomic non-slip handle, a water spray system for dust control, and a robust frame with thickened steel plate to protect internal components. Always use PPE (eye, ear, respiratory protection) and follow local safety rules.

The unit weighs about 150 kg and has barbed anti-skid tires for on-site mobility. It is hand-pushable for short moves; for transport over longer distances use appropriate lifting/moving equipment.

Regular maintenance includes keeping the water tank clean and filled, inspecting and replacing worn blades, checking and tightening blade mounting and bolts, cleaning filters/nozzles in the spray system, and periodic motor inspections/lubrication per supplier recommendations.

Blade life depends on material hardness, cutting load and cooling. With the integrated water cooling and correct blade choice you’ll get extended life, but inspect the blade before each use and replace when cutting performance drops or the blade shows wear/damage.

The motor is rated at 7.5 kW. Exact voltage and phase (single/three-phase) are not specified here—confirm required voltage and connection type with the supplier or in the product manual before operation.

It is designed for concrete piles; cutting through reinforced sections is possible with the right diamond blade rated for rebar and concrete. Expect increased blade wear and ensure appropriate blade type and slower feed if cutting through dense rebar.

Spare parts availability varies by supplier. Common replaceable items include diamond saw blades, spray nozzles, drive belts and motor components. Check with your vendor for compatible parts and kits.

Warranty and after-sales support depend on the manufacturer or seller. Ask the supplier for warranty terms, service options, and availability of local technical support before purchase.

Use proper PPE, secure the pile, select the correct blade, keep the water tank filled, set an appropriate feed rate (observe 2700–5400 mm/min range as a guide), maintain steady hand control using the ergonomic handle, and stop to inspect the blade or fittings if vibration/noise increases.