Electrical appliance and furniture automatic frontal feeding sleeve packing machine packaging machine Multi-Function+Packaging+M

This is an automatic frontal-feeding sleeve packing machine designed for sleeve-wrapping and packaging of electrical appliances, furniture parts and similar products. It automatically feeds products into a film sleeve, seals the sleeve and (depending on model) conveys them through a shrink tunnel for finished packaging.

The product line includes FL-6540AF, FL-7540AF and BSE-6040A. Choose based on required sealing width, maximum package cross-section (W×H), power/voltage availability, required throughput and whether an integrated shrink tunnel is needed. See model comparison FAQ for key differences.

FL-6540AF: power 2 kW, single-phase 220 V, max sealing width 670 mm, max cross-section approx. 500×400 mm (W×H), speed 15 m/min, dimensions 1050×1050×2050 mm, weight 380 kg. FL-7540AF: power 2.5 kW, 220/380 V three-phase, max sealing width 770 mm, max cross-section approx. 600×400 mm, speed 15 m/min, dimensions 1150×1050×2050 mm, weight 420 kg. BSE-6040A: higher power (18 kW), max cross-section approx. 500×350 mm, variable speed 0–15 m/min, includes tunnel (1800×600×400 mm), dimensions 2800×950×1750 mm, weight 450 kg. Always confirm final specs with the supplier before ordering.

FL-6540AF: 220 V, 1-phase, 50/60 Hz. FL-7540AF: 220/380 V, 3-phase, 50/60 Hz. BSE-6040A lists higher power (18 kW); please confirm the exact voltage/phasing with the supplier prior to purchase and installation.

Length is effectively unlimited (products of long length can be processed subject to infeed/outfeed arrangements). Maximum cross-sectional dimensions (W×H) by model: FL-6540AF ≈ 500×400 mm, FL-7540AF ≈ 600×400 mm, BSE-6040A ≈ 500×350 mm. Confirm your product's profile against these values before ordering.

The machines are specified for PE sleeve film (polyethylene). For best results you should confirm the recommended film thickness and type (LDPE/MDPE/HDPE or co-extruded PE) with the supplier for your product and shrink requirements.

All models specify a sealing/temperature range of 0–300 °C, allowing a wide range of sealing and shrinking profiles.

FL-6540AF and FL-7540AF: nominal speed up to 15 m/min. BSE-6040A: variable speed from 0 up to 15 m/min (adjustable to match product and film). Actual throughput depends on product size, film, operator skill and downstream handling.

The BSE-6040A listing includes a tunnel sized 1800×600×400 mm. For the FL-6540AF and FL-7540AF the data does not clearly list a tunnel—confirm with the supplier whether a tunnel is integrated or supplied as an optional/external unit.

Typical air source requirement listed for the FL models is 6–8 kg/cm² (approx. 6–8 bar). For BSE-6040A the air requirement is not clearly specified in the table—please confirm the exact pneumatic requirements with the supplier.

Yes. The working table height for all listed models is 825 ± 25 mm, allowing minor adjustment to integrate with most production line conveyors.

FL-6540AF: 1050 × 1050 × 2050 mm, weight ~380 kg. FL-7540AF: 1150 × 1050 × 2050 mm, weight ~420 kg. BSE-6040A: 2800 × 950 × 1750 mm, weight ~450 kg. Account for clearance for operation, service and any tunnel if separate.

Standard practice is supplier-supported installation and commissioning. Many suppliers offer on-site setup, machine testing with your product/film and operator training (machine operation, routine maintenance, safety). Confirm the scope, lead time and any additional costs with the vendor before purchase.

Regular tasks include cleaning sealing bars and conveyor surfaces, checking/cleaning film feed and sensors, inspecting heaters and electrical connections, lubricating moving parts per the manual, and replacing wear parts (sealing strips, cutter blades) as needed. Perform daily visual checks and scheduled preventive maintenance per the supplier's manual.

Match the model to: (1) maximum product cross-section (W×H), (2) required sealing width, (3) available electrical supply and power, (4) required throughput (m/min) and (5) need for an integrated shrink tunnel. If you have large or unusually shaped items, or require higher power/steam shrink, discuss your product samples and packaging requirements with the supplier so they can recommend the best model and any custom options.