Wood Splitter for Cutting Large Logs and Logs Electric Log Wood Splitting Machine Rip Saw Wood Cutting Machine

The machine can cut logs up to 2000 mm (2 meters) in length.

Typical throughput is 2–3 m³ per hour, depending on log species, diameter, and operator feed rate.

The motor is 47 kW and the voltage is customizable. It requires a suitable industrial three‑phase power supply — contact the seller with your local voltage/frequency to confirm exact electrical requirements and breaker sizing.

Overall dimensions are 3340 × 950 × 1400 mm (L × W × H) and the machine weight is approximately 1700 kg. Plan for adequate floor space and lifting equipment for delivery and placement.

The saw blade listed is 305 × 2.6 mm and runs at approximately 3800 r/min.

It is designed for round wood and logs and is suitable for a wide range of hardwoods and softwoods. Actual performance depends on log diameter, moisture content and species.

Yes. Use machine guards, emergency stop, and interlocks where fitted. Operators should wear hearing protection, eye protection, cut‑resistant gloves, and safety footwear. Follow all local safety regulations and the operator manual.

A level, sturdy concrete floor is recommended. The machine’s weight and size usually require a forklift or crane for placement. Anchoring may be required for stability—confirm with the seller or installation manual.

Daily: visual inspection, clean debris, check guards and emergency stops. Weekly: check blade condition/tension and lubrication points. Monthly: inspect gearboxes, belts and electrical connections. Replace or sharpen blades as needed. Always follow the provided maintenance manual.

Blade replacement requires following lockout/tagout procedures and using proper mounting hardware. Sharpening or replacement intervals depend on use. Spare blades and consumables are usually available from the manufacturer or dealer—contact them for part numbers and lead times.

Standard configuration may be basic (horizontal rip saw). Optional accessories such as infeed/outfeed conveyors, log clamps, feed rollers or dust extraction can typically be supplied — check with the seller for available options.

This is heavy industrial equipment and will produce significant noise and vibration during operation. Hearing protection is mandatory; vibration dampening and proper mounting reduce transmitted vibration. Ask the manufacturer for measured noise data if required for compliance.

Operator training is strongly recommended. The seller or dealer may offer training on safe operation, maintenance and troubleshooting—confirm availability when purchasing.

Warranty terms, spare parts availability and technical support vary by supplier and region. Contact the seller or your local dealer for detailed warranty coverage, lead times for spare parts, and after‑sales support options.

Due to its weight (≈1700 kg) and size, the machine is typically shipped on a pallet/crate by freight carrier. Arrange for a forklift or crane at delivery, and check cranage/clearance requirements with the supplier before shipment.