WD-3025 Automatic Gold Foil Printing Machine Digital Hot Foil Stamping Machine

The maximum printable area is 250 x 300 mm (length x width), suitable for most cards, panels, and small flat objects.

The WD-3025 accepts materials up to 30 mm thick.

Printing speed ranges from 20 to 50 mm/s; you can adjust speed depending on material and desired quality.

It supports a wide range of flat media including paper, cardstock, coated paper, cardboard, some plastics (e.g., phone cases), and many synthetic/leather-like materials. Always test new substrates first to confirm adhesion and heat tolerance.

This is a single-color flatbed hot foil stamping machine. Multi-color effects can be achieved by running multiple passes with careful registration.

While marketed for gold foil, the machine is compatible with typical hot stamping foils such as gold, silver, colored metallics, matte foils, and holographic foils—provided the foil width and core fit your setup.

The WD-3025 is compatible with CorelDraw, Adobe Illustrator (AI), Photoshop, and PDF files. Prepare artwork at 300 dpi for best results; vector files are recommended for crisp edges.

The machine is designed to work with Windows operating systems. If you use macOS, export to PDF or use a Windows virtual machine or PC for direct control.

Power specification is AC 110–240 V, 50/60 Hz with a rated power consumption of 150 W.

The print head life is rated to 150,000 m (meter) of printing. Actual lifespan will vary with usage, maintenance, and material type.

The WD-3025 comes with a 1-year warranty. For setup, spare parts, or technical support beyond the warranty, contact your supplier or authorized service provider.

Regular maintenance includes keeping the flatbed and heating area free of foil residue and dust, checking rollers and feed paths for debris, and following the manufacturer’s maintenance schedule. Replace foil rolls and worn parts as needed and power off and allow cooling before cleaning.

Check foil tension and alignment, increase stamping pressure or temperature (if adjustable), slow down the speed, ensure the substrate is flat and properly positioned, and confirm artwork density and DPI. Run test settings on scrap material until you achieve the desired result.

The WD-3025 works with common design software on Windows. Typically you prepare artwork in CorelDraw/AI/Photoshop or export as PDF and send it to the machine via the provided connection method/driver. Consult your supplier for the exact connection method and driver installation instructions.

Yes. Operate on a stable, grounded outlet (AC 110–240 V), avoid touching heated elements during or immediately after operation, allow cooling before maintenance, keep hands and loose clothing away from moving parts, and follow all local electrical and workplace safety guidelines.