Vacuum Glass Glazing Lifter Robot For Glass Installation

Standard Eternalwin models cover lifting capacities of 300 kg (EWR300) up to 800 kg (EWR800). Custom configurations down to around 200 kg may be available on request.

Depending on the model the lifting height is adjustable. Typical standard models offer up to 3.5 m (EWR300–EWR600) and up to 5.0 m for the EWR800. The product can also be configured for intermediate heights to suit project needs.

The lifter is 100% electrically powered with maintenance‑free batteries (e.g., 24V/80–120Ah depending on model). Typical continuous working time can reach up to 24 hours under normal working conditions; full charge time depends on model and charger (approximately 6–10 hours depending on battery capacity and charger current).

Operation supports electric and manual control methods. The unit is battery walking type (rear‑wheel drive/steer) with electric suction/deflation. Glass flipping (90°) and rotation (360°) are manual; side/left‑right fine tuning for installation is electric.

Safety features include CE certification, two independent vacuum systems for redundancy, American THOMAS DC vacuum pump, independent air valves per sucker, electric suction/deflation with monitoring, and robust hydraulic controls. Operators should follow safety checks and limit loads to rated capacities.

Standard suction cup diameter is 300 mm made from imported silica rubber to protect glass surfaces and minimize scratching. Each cup has an independent valve to isolate a cup if required.

Yes. In addition to glass and windows, the lifter is suitable for lifting/moving steel sheets, marble, granite, and other flat, non‑porous materials. Porous or highly uneven surfaces may reduce vacuum effectiveness and are not recommended.

Yes. The machine has a compact structure for elevator/minivan access and a lateral torsion function for passing narrow corridors. Larger tires and rear‑wheel drive/steering provide good passing performance on rough surfaces.

Routine maintenance includes: checking suction cups for wear and cleanliness, inspecting vacuum pump operation, verifying independent valves and seals, monitoring battery condition and charging, checking hydraulic components and wheels. Replace worn suction cups and follow the manufacturer's service schedule.

Warranty terms and spare‑parts availability vary by dealer/region. Eternalwin offers spare suction cups, batteries, pumps, chargers and other components—contact your supplier or Eternalwin sales for exact warranty terms and parts support.

Eternalwin can provide customization for special needs such as powered rotation, different suction cup layouts, or adjusted lifting heights. Contact sales with your project requirements (glass size, weight, site constraints) for a quote and lead time.

Operators should be trained on the specific model, including battery charging, vacuum system checks, safe load handling, emergency procedures, and daily pre‑start inspections. Eternalwin or authorized distributors typically offer operator training and user manuals.

The lifter is designed for construction environments and rough conditions, but performance of vacuum seals and batteries can be affected by extreme temperatures. For very cold or very hot conditions, consult Eternalwin for recommended seals, battery options and operating temperature limits.

Standard body width is 840 mm; body length is typically 2660 mm (some models 2800 mm). Wheel sizes vary by model (250×80 mm up to 400×100 mm). These compact dimensions facilitate transport and elevator access—confirm dimensions for your selected model before planning transport.