Reliable Oscillating Knife Tool - Model SRT91102

The SRT91102 is an oscillating knife designed for precision cutting in applications such as automotive interior trim, home textiles, advertising materials, machinery components, and electronics—where controlled, thin-to-medium thickness cuts are required.

Key specs: motor power 80 W, maximum speed 18,000 rpm, stroke (amplitude) 1 mm, cutting thickness range 0–50 mm, cooling air pressure 0.2–0.5 MPa, install diameter 40 mm, applicable blade width 6–7 mm, compatible blade thicknesses 0.63, 1.0, 1.2, and 1.5 mm, weight 1.6 kg.

It is suitable for many soft-to-semidense materials commonly used in automotive interiors, textiles, foam, plastics used in signage, and similar substrates. For best results, test the specific material and thickness before production use.

The tool is rated to cut materials from 0 up to 50 mm thickness, depending on material type, blade selection, and feed technique.

Compatible blade widths are 6–7 mm and blade thicknesses of 0.63, 1.0, 1.2, and 1.5 mm. The install diameter is 40 mm, so blades or adapters must fit that mounting size.

Yes. If you want to use blades with thickness 1.0 mm, 1.2 mm, or 1.5 mm, a separate blade holder is required (not included by default).

The product description does not explicitly state that blades or blade holders are included. Because a separate holder is required for some blade thicknesses, confirm contents with the seller before purchase.

The tool is designed with optimal cooling using compressed air at 0.2–0.5 MPa and specifies an applicable tubing outer diameter of 6 mm. Ensure a clean, regulated air supply in that pressure range for proper cooling.

The motor power is 80 W, but the description does not specify voltage or plug type. Check the product label or contact the seller/manufacturer for voltage/cord specifications and regional variants.

The tool weighs approximately 1.6 kg. Its compact, lightweight design is intended to reduce operator fatigue during extended use, but appropriate rest breaks and ergonomic handling are recommended.

The SRT91102 comes with a 1-year warranty and includes a video outgoing inspection and a machinery test report to verify quality and functionality prior to shipment.

Regularly keep the blade and cutting head clean, inspect and replace worn blades, ensure blade mounting hardware is tight, maintain a clean/dry air supply for cooling, and follow any manufacturer maintenance schedule. Always disconnect power and air before servicing.

Stop use immediately. Check that cooling air is within 0.2–0.5 MPa and flowing properly, verify the blade is sharp and correctly mounted, inspect for debris or obstructions, and ensure the motor isn't overloaded. If problems persist, contact technical support or your vendor with the test report/video documentation.

Wear appropriate PPE (safety glasses, cut-resistant gloves, hearing protection as needed), secure the workpiece, keep hands away from the blade while operating, disconnect power and air before changing blades or servicing, and follow all local safety regulations and any manufacturer instructions.

Contact the seller or manufacturer to order spare blades, blade holders (required for 1.0/1.2/1.5 mm blades), and other replacement parts. Provide the model number (SRT91102) and details from the machinery test report to ensure correct compatibility.