Portable Standing Seam Roofing Panel Roll Forming Machine

It is a vehicle‑mounted mobile roll forming line that cold‑bends color‑coated steel coil into standing‑seam and other roof/wall panel profiles (including trapezoidal, curved panels and glazed tiles), then rolls, crimps and seals them into continuous sections for lightweight, high‑strength roofing and cladding.

Yes — the design is for vehicle‑mounted mobile construction use. It can be mounted on a truck or trailer for on‑site forming; alternatively it can be skid‑mounted for relocation between jobs.

It produces standing seam roofing panels and various trapezoidal/tile and curved profiles. Profiles can be standard or fully customized based on your photo or drawing (including double‑layer, 3‑in‑1 multifunctional options).

The machine is built for color‑coated steel coil. Typical working thickness is 0.3–0.6 mm (common for roofing and wall sheet work); thicker gauges can often be accommodated with design adjustments — please specify material and thickness when ordering.

Maximum forming speed is 15 m/min. Theoretical continuous strip output at that speed is up to 900 m per hour; actual hourly panel throughput depends on panel length, seaming cycles, cutting frequency and on‑site setup.

Main motor power is 4 kW with a cycloidal reducer. Standard electrical supply is 380 V, 50 Hz, 3‑phase (other voltages available on request). Hydraulic cutting uses 40# hydraulic oil. Forming shafts are 70 mm diameter made from 45# quenched and tempered steel.

It uses a hydraulic cutting system for clean cuts without stopping the machine. The cutting table and dies are made from Cr12 mould steel with quench treatment for long life and good wear resistance.

The standard pressing (forming) width is 1000 mm. If you require a different maximum width, we can discuss customization options.

The main frame is fabricated from 350H steel for robust rigidity and durability suitable for mobile and on‑site working conditions.

Yes. The horizontal hydraulic arch capability allows formation of trough‑shaped single‑arch and curved panels used for door/wall canopies to divert rain and protect openings and facades.

Yes. We provide on‑site installation and commissioning services and operator training. Remote technical support and documentation are also available; specifics are confirmed at order.

Regular tasks include lubrication of moving parts, periodic hydraulic oil checks/replacement (use 40# hydraulic oil or equivalent), inspection and sharpening/replacement of cutting tools, and checking bolts/shafts for wear. Scheduled maintenance extends service life and ensures consistent product quality.

Standard safety measures include emergency stop controls, guarding around rotating/pressing parts, hydraulic pressure relief and safe electrical wiring. Operators must follow safety procedures and use PPE; additional safety options can be fitted on request.

Yes. We can customize profile geometry per drawing or photo, change electrical supply to customer requirements, and offer options such as servo drives for higher speeds, different cutters or multi‑function setups (double layer, 3‑in‑1, etc.).

Typical offerings include a warranty on main mechanical, electrical and hydraulic components (commonly 12 months) plus life‑long technical support and spare parts supply. Exact warranty and support terms are agreed in the sales contract.