ONK Opt4 Electrostatic Coating Powder Machine with Powder Coating Gun

The Opt4 features dual operating modes (automatic and manual), a high-quality powder coating gun, accurate temperature control, fast drying time (about 15 minutes), and a wide coverage area of approximately 130 sqft per pound.

The ONK Opt4 supports 110V and 220V power supplies. Use the correct voltage configuration for your region and consult the user manual or a qualified electrician for proper setup.

The Opt4 is compatible with standard thermoset powder coatings commonly used in automotive, furniture, appliance, and decorative metalwork applications. Always verify powder manufacturer recommendations for gun settings and cure parameters.

The stated coverage is approximately 130 square feet per pound, though actual coverage will vary depending on part geometry, film thickness, and application technique.

Dry time is listed at about 15 minutes; however, final cure depends on the powder type and curing oven profile. Follow powder manufacturer cure schedules and confirm with your oven settings.

Yes. The Opt4 includes accurate temperature control intended to help achieve consistent results, but final curing is performed by a compatible oven or curing system following powder specifications.

The system includes the powder coating gun and a pump as the core component. Specific accessory bundles may vary—check the product listing or contact the supplier for a complete parts list.

Yes. The dual automatic/manual modes and user-friendly design make it appropriate for professional shops and serious hobbyists, while offering features needed for consistent results.

Use appropriate PPE (respirator rated for powder coating, eye protection, gloves, and protective clothing), ensure proper ventilation or a powder booth, verify grounding of equipment and workpieces, and follow local safety and environmental regulations for powder handling and overspray.

Regular maintenance includes cleaning the gun, nozzles and feed lines after use, checking and replacing worn seals, inspecting the pump, and keeping the hopper and fluidizing elements free of contaminants. Follow the maintenance schedule and procedures in the user manual.

The machine requires a stable electrical supply (110V/220V as configured) and a suitable work environment such as a spray booth or well-ventilated area. For compressed air specifics (pressure, flow, filtration), refer to the user manual or supplier recommendations.

Yes. A machinery test report is provided with the product. Note that video outgoing inspection is not available as per the product information.

The single package size is 80 x 58 x 58 cm and the gross weight is approximately 40.0 kg.

Replacement parts such as nozzles, seals, and pump components are typically available—contact the supplier or authorized service center for parts, technical support, warranty information, and service options.