LP-300 Self-Contained Carpet Extractor Cleaning Machine Commercial Hotel Carpet Washing Machine

The LP-300 is a commercial-grade, self-contained carpet extractor designed for heavy-duty carpet cleaning in hotels, offices and other commercial environments. It combines suction, agitation (brush) and freshwater/recovery tanks in one unit for efficient cleaning.

Key specs: 220V, 1200W power, weight 49 kg (55 kg packaged), dimensions 94×49×93 cm, fresh tank 38 L, sewage tank 30 L, brush speed 900 r/min, working width 38 cm, cable length 15 m, sound level ≤70 dBA.

The LP-300 uses a cold-water cleaning process and supports Clean-In-Place (CIP) operation, meaning it applies solution, agitates with the brush, and extracts dirty water back into the recovery tank without moving the carpet.

No. The LP-300 is designed for cold-water cleaning. Using hot water may damage seals, components and void warranty — follow the manufacturer's guidelines.

Yes, you can use recommended cold-water carpet cleaning detergents. Use only manufacturer-approved or non-flammable, water-soluble cleaning solutions and follow dilution instructions. Test any chemical on an inconspicuous area first.

Basic steps: fill the fresh tank with water (and diluted detergent if used), switch on power, lower brush and engage agitation while moving the machine forward, then extract by moving over the area to vacuum up solution. After use, rinse tanks and brushes per the manual.

Follow the operator manual: power off, remove or open tank access points and drain the sewage/recovery tank, rinse both tanks with clean water and remove debris/filters. Many units have removable tanks or drain outlets — consult the supplied instructions for safe draining.

Routine maintenance includes emptying and rinsing tanks after use, cleaning or replacing filters, inspecting and cleaning the brush, checking hoses for blockages or leaks, inspecting seals, and storing the machine dry. Follow the maintenance schedule in the user manual.

Yes. With a sound level ≤70 dBA it is suitable for daytime cleaning in hotel public areas and guest rooms. For quiet-night operations, test noise acceptance and schedule cleaning when it will least disturb guests.

The LP-300 is intended primarily for carpets and commercial rugs. It can be used on many synthetic pile carpets; avoid delicate or non-waterproof floor coverings. Always test a small area first and follow manufacturer recommendations for fiber care.

Requires a 220V AC supply and can draw up to 1200W. Use a properly grounded outlet and ensure the circuit can handle the load. Avoid using damaged extension cords; if an extension is required use a suitably rated cord and avoid shared high-load circuits.

The unit weighs 49 kg (55 kg packaged) and is designed for maneuverability in commercial settings. While it has a relatively light design for its class, moving across stairs or lifting will likely require two people or powered equipment — follow safe lifting practices.

Common replacement parts such as brushes, hoses, filters and seals are typically available from the manufacturer or authorized dealers. Contact your supplier for part numbers, compatibility and recommended accessories.

Check for full or clogged recovery tank, blocked hoses or filters, worn or packed brush, leaks in suction lines, and ensure the vacuum motor is running. Empty and clean tanks/filters and inspect hoses before contacting service.

Warranty terms and service plans vary by seller and region. Contact the seller or manufacturer directly for specific warranty duration, coverage details and authorized service centers.