Liquid Ammonia Pump Chemical Pump

It is designed for high-pressure chemical pumping tasks such as agricultural irrigation, district energy, chemical processing, water treatment and other industrial pumping applications involving liquid ammonia or similar fluids.

The pump is a single-stage centrifugal pump with a closed impeller, driven by an electric motor.

Available materials include stainless steel and cast iron. Stainless steel is generally the preferred choice for ammonia services; compatibility should be confirmed with your fluid's concentration, temperature and any additives—consult the supplier for material recommendations.

Standard supply options are 380/400V and 50–60Hz. Rotational speeds offered are 1450 rpm or 2980 rpm; other motor options can be provided on request.

Yes. Pressure rating, horsepower, cable length/outlet size and other performance parameters can be customized to meet customer requirements.

The pump supports packing gland seals and mechanical seals. The appropriate seal type should be selected based on fluid properties, operating pressure and maintenance preferences.

Yes—this model is designed for high-pressure capability. Exact pressure ratings are customized per customer request and application requirements.

Regular maintenance includes inspection of seals and gaskets, monitoring bearings and lubrication as specified by the motor manufacturer, checking alignment, removing deposits from the impeller, and replacing worn parts (seals, bearings, gaskets) as needed.

Follow all applicable safety regulations and the fluid's Safety Data Sheet (SDS): ensure adequate ventilation, use appropriate personal protective equipment (PPE), install leak detection, provide emergency shutoff, and ensure personnel are trained in handling ammonia and emergency procedures.

Common spare parts include impellers, mechanical seals or packing, bearings, gaskets, shafts and wear rings. Contact the supplier for a recommended spare parts kit for your configuration.

Yes. OEM and ODM support is available to tailor materials, dimensions, performance, electrics and other features to your project's needs.

Install on a rigid, level foundation, ensure correct shaft alignment with the driver, connect piping with proper support to avoid strain, install recommended valves and instrumentation, and follow electrical wiring by a qualified electrician to match motor specifications.

Provide the pumped fluid details (composition, temperature), required flow and pressure (or duty point), inlet/outlet sizes, desired materials, motor voltage/frequency, site conditions and any special certification or mounting requirements.

Typical single package dimensions are approximately 100 x 50 x 50 cm with a gross weight of about 110 kg. Exact shipping dimensions depend on the specific configuration.

Certification and warranty terms are not specified in the basic listing. Please contact the supplier to discuss compliance with local or industry standards and to obtain warranty and after-sales service details for your order.