Landscaping Professionals Used for Uneven Filed Stump Removal Machine stump-cutting equipment

The product model is DR-SG-27PRO and the brand is K-MAXPOWER.

It is powered by a 27 HP gasoline engine.

The cutter can reach 245 mm below ground and up to 700 mm above ground, allowing removal of most surface and shallow-root stumps.

There are optional configurations of 8, 9, or 12 teeth. Fewer, larger teeth are typically better for heavy-duty, coarse removal of large stumps; more teeth provide smoother, faster cutting for smaller stumps or finer material. Choose based on stump size and desired finish.

Yes — the DR-SG-27PRO is designed for uneven fields and rough terrain. However, always follow the operator manual and safety guidelines; avoid excessively steep slopes and unstable ground.

The unit is self-propelled and features Forward, Reverse and Neutral gears to assist maneuvering around job sites.

Dimensions are 106 cm (L) x 80 cm (W) x 65 cm (H) and the unit weighs approximately 1,000 kg. Use an appropriate trailer, lift, or transport equipment rated for this weight.

Typical uses include landscaping stump removal, forest maintenance, land clearing for construction or gardening, and preparing sites for replanting.

Operators should wear safety goggles or a face shield, hearing protection, heavy-duty gloves, long pants, and steel-toed boots. Clear the area of bystanders, inspect the work zone for hazards, secure the machine on level ground where possible, and follow the operator manual.

Perform daily pre-operation checks (fuel, oil, fasteners, teeth condition), keep cutting teeth sharp and replace when worn, change engine oil and filters per the engine manufacturer's schedule, inspect belts/drive components, and clean the machine after use. Refer to the supplied maintenance manual for detailed intervals and procedures.

Yes. K-MAXPOWER supports spare parts such as replacement teeth and wear components. Contact your supplier or the manufacturer for part numbers and availability.

Yes. The product supports OEM/ODM and color customization—contact the manufacturer or sales representative to discuss specific customization requirements.

The unit is a dedicated stump-cutting machine; some site-specific accessories may be available from K-MAXPOWER or third-party suppliers. Consult the manufacturer to confirm compatibility and options.

Because the machine weighs about 1,000 kg, use a suitably rated trailer and loading equipment (ramp, forklift, or crane). Secure it properly to prevent movement, drain or secure fuel if required by transport regulations, and check local road/permit requirements for heavy loads.

For warranty details, technical support, or to purchase the DR-SG-27PRO, contact your K-MAXPOWER dealer or the official manufacturer/sales representative. If you need contact details, ask your supplier or visit the brand's official website.