Insulated Tube Terminal Crimping Machine for VE E Tube Type Pre-Insulated End Terminals

It supports computer terminals, DC terminals, AC terminals, single-grain terminals, joint terminals and is compatible with VE E Tube type pre-insulated end terminals. Both vertical and horizontal crimping molds are supported.

Models: WL-1.5T (1.5 Ton, 1500 KG nominal pressure, 550 W motor), WL-2.0T (2.0 Ton, 2000 KG, 750 W), WL-4.0T (4.0 Ton, 4000 KG, 2200 W), WL-8.0T (8.0 Ton, 8000 KG, 3000 W). Standard stroke 30 mm (40 mm customizable). Power supply: 220V/50Hz or 110V/60Hz.

The machine accepts replaceable crimping molds and applicators. Change the mold to match the terminal design (vertical or horizontal) — dies should be designed according to your terminal. Replacement is straightforward; follow the supplier's mold-change procedure or request onsite guidance if needed.

Yes. Stroke is standard at 30 mm and 40 mm is available as a customization option. Crimping dies can be customized/designed to match specific terminal geometry and wire sizes.

A built-in frequency converter controls motor speed, allowing adjustable production rate. Speed and output can be fine-tuned to match terminal type and production requirements.

Yes. It supports manual mode for setup and low-volume use, and automatic mode for continuous production. Switching between modes is simple and user-friendly.

An LED display counts and shows the number of crimped terminals so you can monitor output without external counters.

Lubricate the stamping guide rail every 1–2 hours with 2–3 drops of oil via the top filling hole. Clean the machine daily to remove dirt and excess oil. Grease (butter) the main speed bearing weekly. Follow these routines and the supplier's maintenance instructions.

Common issues: uneven or incomplete crimps (check die alignment, correct die selection, and pressure settings), jams or feeding errors (clean applicator and terminals, verify feeder alignment), reduced speed or inconsistent strokes (check frequency converter settings and lubrication). If problems persist, contact technical support.

The machine uses a built-in frequency converter and is described as low-noise (semi-auto mute design), so it operates more quietly than many conventional terminal presses.

It is suitable for terminal processing in electronics, electrical appliances, toys, automotive, motorcycle, and other industries that require crimping pre-insulated end terminals.

Power supply options: 220V/50Hz or 110V/60Hz. Motor power varies by model (550 W to 3000 W). Ensure your facility can supply the correct voltage and sufficient circuit capacity for the selected model.

Yes — most suppliers offer sample testing. Provide your terminal samples and wire specifications so the supplier can design or select appropriate dies and demonstrate crimp quality and cycle rate.

Dies are typically designed according to your terminal; tooling arrangements vary by supplier. Custom dies and applicators can be manufactured to match your terminal dimensions — consult the supplier for tooling options and pricing.

Follow standard machine safety: keep hands clear of the crimp area during operation, use guards and emergency stop, ensure proper lockout/tagout when servicing, avoid overfilling oil, and train operators on mode switching and maintenance procedures. Refer to the machine manual for full safety guidelines.