HM5015A Automatic Finger Joint Shaper With Glue Finger Joint Shaper Press Line Woodworking Machine

The HM5015A is an automatic finger joint shaper with an integrated glue applicator and press line, designed to produce strong finger-jointed timber for furniture, doors, cabinets and frames. It is suitable for professional shops and serious hobbyists needing reliable, continuous finger-joint production.

Key specs: electrical power source, 380V supply, motor power 18.7 kW, weight 1600 kg, dimensions 3300 × 1900 × 1250 mm, maximum processing width 500 mm, maximum processing thickness 150 mm.

It is intended for solid wood and many engineered/laminated timber products used for finger joints. Performance depends on wood species, moisture content and adhesive choice. It is not intended for metal or non-wood materials.

Maximum processing width is 500 mm and maximum processing thickness is 150 mm. Longer workpiece length is generally limited by infeed/outfeed handling and workshop space.

Yes — this model is supplied as an automatic finger joint shaper with glue application and a press line to bond and press finger joints in a continuous workflow. Confirm included accessories and configuration with the supplier before purchase.

The machine requires a 380V three-phase electrical supply sized to support an 18.7 kW motor. A qualified electrician should install the wiring and protection. Allow space for the machine footprint plus material handling and maintenance access.

Typical safety items include emergency stop buttons, guards around cutting and pressing zones, interlocks and clear operator controls. Operators should use hearing protection, eye protection, and dust masks; follow local safety regulations and the manufacturer's safety instructions.

Routine maintenance includes cleaning glue residues, lubricating bearings and moving parts, inspecting and replacing worn cutters or belts, checking electrical connections, and periodic calibration of feed and press systems. Follow the manufacturer's maintenance schedule and keep a log.

The machine uses finger joint cutter heads (typically carbide-tipped or HSS cutters depending on configuration). Exact cutter type, diameter and arbor specs vary by configuration — obtain compatible cutter assemblies and replacement procedures from the supplier or manual.

Throughput depends on board length, feed speed, finger pattern, glue type and curing/pressing settings. The HM5015A is built for continuous production and can handle both small and large runs; contact the manufacturer or supplier with your workpiece dimensions and desired cycle time for an estimated output rate.

Suppliers commonly offer operator training, start-up support and documentation. Confirm training options, manuals and commissioning services with the vendor at purchase.

Effective dust extraction is essential. The machine should be connected to a suitable dust extraction system sized for the machine's airflows and production volume. Follow local regulations and the manufacturer's recommendations for ducting and filtration.

Most manufacturers and dealers provide spare parts and after-sales support. Verify spare parts availability, lead times and warranty terms with the supplier before purchase.

Physically it is relatively compact for its class (3300 × 1900 × 1250 mm) but weighs about 1600 kg. It can fit smaller workshops if floor load capacity, ceiling height and space for material handling are adequate. Plan for installation access and clearances.

Warranty coverage and service packages vary by manufacturer and dealer. Ask the supplier for detailed warranty terms, what is covered (parts, labor), available extended service plans, and recommended preventative maintenance contracts.