The model number of the High Precision Xenon Test Chamber is SX/6500/H.
It uses a 6.5 KW water-cooled long arc xenon lamp as its light source.
The expected lamp life for the xenon lamp is approximately 2000 hours.
The effective exposure area is 6500 cm², allowing for 63 to 65 standard samples of 150mm x 70mm to be exposed at one time.
Irradiance is monitored at several points, specifically at 340nm, 420nm, 300nm–400nm, and 300nm–800nm.
The operation room temperature can be adjusted up to 70℃ in dark conditions.
The black panel temperature can reach up to 110℃, and the black scale temperature can reach up to 120℃.
The temperature fluctuation is maintained at ±1℃.
The chamber can accommodate a humidity range of 10%-75% when light is on, and 10%-95% when light is off.
The sample rotating speed is 1 rotation per minute around the center of the lamp.
Yes, the spray duration and spray cycle can be set arbitrarily according to your needs.
High purity deionized water is used, with a conductivity of less than 2 µs/cm.
The mains power requirement is AC380V±10%, three-phase four-wire at 50Hz, with a maximum current of 50A and maximum power of 9.5KW.
The pure water flow rates are 0.2 L/min for humidification, sample spray (front), and sample rack spray (back).
The external dimensions are 1220mm in length, 1200mm in width, and 2050mm in height.
Discover our latest orders