Fully Automatic PVC Edge Banding Machine: Streamlining Wooden Furniture Processing

It's designed to automatically apply PVC edge banding to wooden furniture panels (e.g., MDF, particle board, solid wood edges), trimming and polishing the edges to produce a finished, factory-quality look.

Banding tape thickness: 0.4–3 mm. Banding tape width: 10–60 mm.

Workpiece thickness: 10–60 mm. Minimum workpiece length: ≥100 mm. Minimum workpiece width: ≥50 mm.

Feeding speed is adjustable between 10–23 m/min. Production throughput depends on panel sizes; at 20 m/min the machine applies about 1,200 m of edge banding per hour in continuous running.

Heating power: 1.5 kW. Feeding motor: 2.2 kW. Glue spreading motor: 0.37 kW. End trimming motors: 0.55 kW × 2. Fine trimming motors: 0.75 kW × 2. Rough trimming motors: 0.75 kW × 2. Corner trimming motors: 0.5 kW × 2. Polishing motors: 0.37 kW × 2.

Overall dimension: 4700 × 750 × 1500 mm. Packing size: 5000 × 1000 × 1600 mm. Net weight (N.W.): 1600 kg. Gross weight (G.W.): 1870 kg.

Required air pressure is 0.8 MPa (approximately 8 bar). Ensure a stable, dry compressed air source sized to supply the machine's pneumatic components.

The glue mechanism uses four irregular cylindrical pinch rollers to firmly press the band to the panel, plus board preheating for better adhesion. The glue pot is nonstick for easy cleaning and minimal residue. Automatic oiling equipment is also included.

Includes end trimming with precise guide-track movement and auxiliary pinch roller for narrow boards; rough trimming and fine trimming (six-edge knives and linear guideways) for smooth cuts; scraping unit with dust-collecting pipe; and buffing/polishing with cotton polishing wheels for smooth surfaces.

Yes. It features a dust-proof plate along the edge banding process and a scraping unit with a dust-collecting pipe to reduce airborne dust and make cleanup easier.

The machine is equipped with an easy-to-operate control panel for adjusting feeding speed, temperature and process parameters. Settings are accessible to operators and intended for straightforward daily use.

Safety features include dust-proof protection plates, pneumatic components (SMC cylinders and throttles) for stable, low-noise operation, and standard emergency stop and guarding to protect operators during operation.

Regularly clean the glue pot and glue rollers, check and replace trimming knives and polishing wheels as needed, lubricate guide rails and moving parts per schedule, inspect pneumatic lines and filters, and keep dust collection functioning.

Primarily designed for PVC edge banding on wooden furniture panels such as MDF, particleboard and solid wood edge banding. Also compatible with most standard PVC banding tapes within the specified thickness/width ranges.

Provide a flat, level floor able to support the machine weight, adequate electrical supply matched to motor ratings, stable compressed air at 0.8 MPa, sufficient space for loading/unloading and ventilation, and access for dust extraction. Professional installation and commissioning are recommended.