Fast Inkjet Dtf UV Flatbed Epson Print Head Phone Case A3 UV Dtf Printer Sticker 30cm Transfer ab Film Pet for DIY

It's an A3-sized flatbed UV inkjet printer with an Epson L805 print head designed for fast, high-resolution (1440x1440 dpi) printing on a variety of materials—ideal for phone cases, stickers, small signage and DIY projects. It uses UV inks and supports a maximum print area of 320 x 500 mm.

This model uses UV-curable inks (including CMYK + White). UV inks cure quickly under UV light, producing durable, scratch- and fade-resistant prints. Always use inks recommended by the supplier to avoid damage to the print head or warranty issues.

Maximum printable area is 320 x 500 mm (A3+). The automatic flatbed allows printing on rigid and semi-rigid items such as phone cases, rigid PVC, acrylic, metal plates and sticker media. For very thick or unusually shaped items, check the seller's max substrate thickness specification.

Typical print speed is 6–8 minutes for an A4-size color print. Actual speed can vary depending on resolution, RIP settings, coverage and substrate.

The printer supports up to 1440 x 1440 dpi, delivering high-detail, photographic-quality output when using appropriate RIP settings and high-resolution artwork.

Yes—this flatbed UV printer is designed for printing on phone cases and sticker media. For best adhesion and durability, some plastics may require a primer or surface pre-treatment; always test on a sample first and follow the supplier’s substrate preparation recommendations.

Common raster formats such as PNG, JPG, TIFF and vector/PDF for artwork are typically supported. Use a RIP or raster workflow for accurate color management and white-ink handling. Export artwork at 300 dpi or higher for best results.

White ink is used as a base layer to print on dark or transparent materials to achieve opacity. Use white underprints for vibrant colors on dark substrates and adjust layering/order in your RIP to control white density and trapping.

As a UV flatbed model, it uses UV-curable inks which are cured by UV light (often integrated). Confirm with the seller whether the specific unit includes an onboard UV lamp and details about lamp type and maintenance.

Regular maintenance includes print head nozzle checks, routine cleaning cycles, flushing/cleaning of ink lines if idle, capping station care and periodic replacement of consumables (wipers, caps, filters). Follow the manufacturer's maintenance schedule to prevent clogging and prolong print head life.

Power: AC 100–240V, 50–60Hz (wide voltage compatibility). Dimensions: 95 x 59 x 70 cm (L x W x H). Weight: approx. 93 kg—plan for two people or equipment to move and install safely.

You will need UV inks (CMYK + White), appropriate flatbed fixtures or jigs for small items, transfer/PET film if using DTF transfer workflows, cleaning solutions and replacement maintenance parts. Specific film types (eg. 30 cm PET transfer film) and powders depend on the workflow—confirm with the supplier.

Package contents vary by seller. Many units require RIP software for optimal color and white management and may need driver installation. Ask the seller which software, cables and accessories are included and whether they offer installation support or setup guides.

UV-cured prints are typically durable, offering good scratch, water and light resistance compared with solvent or dye prints. Durability depends on substrate, ink, curing and any post-coatings. For commercial or wearable products, perform adhesion and durability tests before full production.

Handle UV inks and cleaning chemicals with gloves and eye protection. Ensure good ventilation where curing/printing occurs. Avoid direct eye/skin exposure to UV lamps. Dispose of ink waste and consumables according to local regulations.

The listing mentions free shipping. Warranty and after-sales support vary by vendor—contact the seller for warranty details, spare parts availability, technical support and return policies before purchase.