DIY Electric Power Spray Gun for DIY Home Projects

The unit is electric and the accessories list includes a charger, indicating a rechargeable electric design. Check the specific product listing or contact the seller if you require a corded-only model.

The spray gun has a 4 L cup capacity, which reduces the frequency of refills for most home projects. Actual run time between refills depends on spray flow, material viscosity and job size.

A 1.8 mm nozzle is a medium-size tip suitable for medium to heavier coatings such as latex paints, primers, stains, varnishes and sealers. It provides good coverage while maintaining a relatively fine finish compared with larger tips.

Yes. The gun is intended for wall paints, furniture coatings, stains and sealers. Use the correct thinning and solvent recommended for the paint type and always test on a scrap surface before starting a project.

Thinning requirements vary by product. General guidelines: water-based (latex/acrylic) often need about 5–15% water depending on brand and viscosity; oil-based paints or enamels may need 5–10% mineral spirits or manufacturer-recommended thinner. Always follow the paint manufacturer’s instructions and test spray on scrap material.

3500 psi indicates the spray gun is designed for high-pressure operation to deliver smooth, even coverage and good atomization. Higher pressure improves coverage but can increase overspray — maintain proper distance and technique for best results.

The product is marketed for both DIY and industrial use. It’s suitable for beginners due to its electric operation and large cup, but beginners should practice on scrap surfaces and read the manual for settings and safety.

Empty the cup, then flush the system with the appropriate solvent for the paint used (water for water-based paints, mineral spirits for oil-based). Remove and clean the nozzle, needle and filters. Reassemble after all parts are dry. Regular cleaning prevents clogs and extends life.

Wear appropriate PPE (respirator/mask, eye protection, gloves), work in a well-ventilated area, keep sparks and open flames away from flammable coatings, avoid pointing the gun at people or animals, and follow electrical safety for charging and operation.

Common causes are clogged nozzle or filter, low battery/insufficient charge, improperly thinned paint, loose seals or air in the cup. Turn off power, clean the nozzle and filters, check seals, ensure the unit is charged and test with properly thinned material.

The standard model comes with a 1.8 mm nozzle. The manufacturer supports OEM/ODM customization, so contact the seller or manufacturer to inquire about alternate nozzle sizes or accessory kits.

Single package size is 55 x 41 x 48 cm and the single gross weight is listed as 40.000 kg. The gross weight likely includes packaging materials and any included accessories.

The listed accessory is a charger. Additional accessories may vary by seller or package — check the product listing for included items or optional accessory bundles.

A warranty or return policy is not specified in the product details provided. Check the seller’s listing or contact the manufacturer/seller directly for warranty coverage, return conditions and after-sales support.