Comb Finger Joint Machine Wood Router Finger Jointer for Tenoning Machine MX3515

The MX3515 is a comb finger joint (wood router / finger jointer) designed for precision tenoning and finger joint production. It creates strong interlocking finger joints for furniture, cabinetry, frames and decorative woodwork.

Key specs: electric power source; motor voltage options 220V / 380V; motor power 9.7 kW; spindle speed 6500 r/min; working width 510 mm; blade diameter 305 mm; maximum working thickness 120 mm; machine weight about 650 kg.

The MX3515 is suitable for solid wood, engineered wood and common panel materials used in furniture and cabinet making. Maximum working thickness is 120 mm; actual performance depends on wood density and chosen cutter configuration.

The machine is available for 220V or 380V. The 9.7 kW motor typically requires an industrial-rated circuit (often three-phase for higher-power setups). Have a qualified electrician confirm compatibility with your workshop supply and install appropriate breakers and wiring.

It can be used in a home workshop if you have sufficient floor space, a suitable power supply (see electrical requirements), and a stable foundation for a 650 kg machine. Many hobbyists use it, but plan for dust extraction and noise control.

Use appropriate PPE (safety glasses, hearing protection, dust mask). Ensure blade guards and emergency stop are installed and functional, lockout power before servicing, keep hands clear of cutters, and follow safe feeding procedures. Operator training is strongly recommended.

Yes — the MX3515 comes with a machinery test report for quality assurance. Additional documentation (manuals, CE/inspection certificates) may be provided; confirm with the supplier.

Regular maintenance includes cleaning dust and debris, checking and tightening fasteners, inspecting and lubricating moving parts, monitoring spindle bearings and belts, and sharpening or replacing cutters as needed. Follow the manufacturer's maintenance schedule in the manual.

The machine uses cutter heads compatible with a 305 mm blade diameter. Replace blades/cutter heads with parts that match the machine's arbor and balance specs. Always power down, lock out the machine, and follow the manual when changing cutters.

Throughput depends on material type, joint geometry and operator setup. The 6500 r/min spindle speed and 9.7 kW motor provide high cutting performance for continuous operation; run test pieces to determine optimal feed rates for your application.

Dust extraction and specific noise- or vibration-control accessories are not listed as included. For health and machine longevity, connect a suitable dust extraction system and consider vibration isolation or mounting options. Ask the supplier about available extraction adapters or packages.

Spare parts (cutter heads, bearings, belts and electrical components) are typically available from the manufacturer or authorized dealers. Check with the seller for parts lists, recommended cutters and accessory packages.

The MX3515 is described as user-friendly and suitable for beginners as well as experienced operators. Beginners should receive hands-on training, read the manual, and practice on scrap material before production runs.

Warranty and after-sales support vary by supplier. The machine includes a quality test report; contact your dealer for specific warranty terms, service options, and local support arrangements.

The MX3515 is heavy (approximately 650 kg) and may require special lifting equipment, crating and professional installation. Coordinate with the seller for shipping method, on-site installation, electrical hookup and any required anchoring or foundation work.