6S Gold Shaking Table 6S Shaker Table Mining Equipment

The 6S Gold Shaking Table (6S Shaker Table) is a gravity separation concentrator used to separate fine-grained ores by density. It's commonly used in gold, tin, tungsten and other mineral processing to recover fine concentrate, middling and tailings.

Key components include: ore feeding mouth and chute, water feeding mouth and chute, table surface with riffles, stroke adjusting device, swing adjusting device, horizontal support and adjustment wheel, table support and knife-type support, stand, driving unit, motor support and motor, concentrates and tailings discharge areas.

Feed and transverse water are introduced onto a riffled table surface. Vibrations create vertical and horizontal motion; particles stratify by density and size and move differently across the riffles. Materials are discharged separately as fine concentrate, middle concentrate and tailings.

Available models in the product line: LYS4500 (screen 4500×1850×1560 mm), LYS3000 (3000×1490×1360 mm), LYS2100 (2100×1050×850 mm) and LYS1100 (1100×500×430 mm).

Stroke length and frequency depend on model: LYS4500 stroke 10–30 mm, LYS3000 6–30 mm, LYS2100 12–28 mm, LYS1100 9–17 mm. Frequency ranges are roughly 210–460 T/min depending on model. Exact values are in the specification sheet.

The table is designed for fine to coarse feed: commonly effective for particles from about 2 mm down to sub-0.037 mm (different fractions such as 2–0.5 mm, 0.5–0.074 mm, 0.074–0.037 mm). Recommended feeding density is typically 10–30% solids (by weight), depending on ore and model.

Capacity varies by model and feed characteristics. Typical coarse and fine (slime) capacities range from fractions of a tonne per hour up to a few tonnes per hour depending on model and feed. Water consumption by model (approximate): LYS4500 0.4–0.7 tph, LYS3000 0.3–1.5 tph, LYS2100 0.2–1.0 tph, LYS1100 0.1–0.5 tph.

Standard motor power listed for these models is 1.1 kW. Confirm motor specifications at ordering to match local voltage/frequency and drive arrangement.

Adjustments include stroke length and frequency, table incline (horizontal adjustment wheel), feed rate, and water flow. Use the stroke adjusting device, swing adjusting device and horizontal adjustment wheel to tune motion and slope according to ore characteristics to maximize concentrate grade and recovery.

Install on a stable, level foundation. Provide appropriate power supply for the motor, a controlled water supply and clear access to feeding and discharge points. Ensure the driving unit and motor are securely mounted and align the table level before commissioning.

Regularly inspect the table surface and riffles for wear, check and tighten fasteners, lubricate bearings as recommended, keep the driving unit and motor free of debris, verify water and feed chutes are clear, and replace worn liners/parts promptly to maintain separation performance.

Common spare parts include table surface liners/riffles, feed and water chutes, seals, bearings, drive belts or couplings, and replacement bolts. Keep motor and drive component maintenance items on hand per your operating schedule.

Follow lockout/tagout during maintenance, keep hands and clothing away from moving parts, ensure electrical connections are properly protected and earthed, control water around electrical components, and train operators on safe feed/discharge procedures.

The product is packaged for transport (details depend on model and order). Delivery terms vary by supplier; check packing pictures and delivery options with the seller. For after-sales support, parts and service, contact the supplier or manufacturer for warranty, spare parts supply and technical assistance.