4-Color Flexographic Printing Machine for Paper and Plastic Bags

It is suitable for a wide range of flexible packaging materials including paper, plastic films (polyethylene), non-woven fabric, foils, roll paper and similar substrates used for bags and packaging.

Max width of material is 1200 mm and the maximum printing width is 1160 mm.

The machine is a 4-color flexographic press, designed for four-color process or spot-color flexographic printing using anilox and plate cylinders.

According to the YTC series technical parameters the maximum printing speed is 80–100 m/min; actual speed may vary depending on substrate, ink, drying and job complexity.

Machine dimensions are approximately 8.7 × 2.2 × 2.6 m (L × W × H), machine weight about 6,300 kg, and power supply required is 380 V, 3-phase, 50 Hz.

The machine features a 360° continuous and adjustable longitudinal register device plus accurate mechanical register adjustments and frequency-controlled motor speed to maintain precise color registration during runs.

Yes — a meter counter lets you set the desired printing quantity; the machine will automatically stop when the set quantity is reached or if the material is cut off.

It uses a coordinated high-speed drying system optimized for the press speed. The dryer system is interlocked with the press and will automatically break the circuit (stop) when the machine stops for safety and to prevent overheating.

The press is compatible with standard flexographic inks used for paper and film (water-based, solvent-based and some UV inks depending on the dryer configuration). Confirm ink type compatibility with the supplier based on your substrate and drying system.

The ink is transferred via an anilox cylinder for even ink distribution. Plate cylinders are manually lifted and lowered; the machine automatically stirs the ink after lifting. Regular cleaning and maintenance of anilox and plates are recommended.

Yes. The press includes tension control and frequency-controlled motor speed to adapt to different printing speeds and substrates. Additional adjustments (unwind/rewind tension, dancer systems) may be available or optional.

The machine is designed for relatively easy operation with flexible starting and jogging/stopping controls at the plate roller base and material rack. Basic flexographic operation training is recommended; most suppliers offer commissioning and operator training.

Routine maintenance includes cleaning plates/anilox, checking bearings, rollers and drive components, and dryer maintenance. Contact the manufacturer or supplier for recommended maintenance schedules, genuine spare parts and availability of service contracts.

Many flexo presses can be customized with options such as additional unwind/rewind units, slitting, perforating or inline finishing. Check with the supplier for available optional modules and configurations.

Plan for the machine footprint (approx. 8.7 × 2.2 m) plus space for material handling, operator access and ventilation for the dryer. Ensure 380 V 3-phase power availability and appropriate foundation or floor loading capacity. The supplier can provide detailed installation requirements and site preparation checklists.