3000W Foam Machine Outdoor Indoor Spray Foam Machine Moving Head Jet Cannon Party Pool Spray

The unit is rated 3000W and supports AC 110–240V. It produces up to about 50 cubic meters of foam per minute. Unit dimensions are 120 x 65 x 110 cm. The product listing shows a unit weight of 70 kg; package size is 120 x 65 x 110 cm and the spec sheet also lists a single gross weight (please confirm with the seller if you need exact shipped weight).

Yes — the machine is designed for both indoor and outdoor events. However, it must be protected from direct rain and heavy moisture; do not operate it in heavy rain or when the unit could become wet. Ensure adequate ventilation and consider floor traction indoors because foam creates a slip hazard.

Use a manufacturer-recommended foam concentrate formulated for foam machines (non-toxic, low-foam-residue, biodegradable). Do not use household soaps, shampoos, or high-viscosity liquids. Always follow dilution and mixing instructions provided with the foam fluid.

The machine accepts AC 110–240V. Because it draws 3000W, expect roughly 25 A at 120V or 13 A at 230V — use a properly rated circuit and avoid sharing the circuit with heavy-load devices. Use a GFCI-protected outlet and follow local electrical codes. If unsure, have a qualified electrician assess your power setup.

The listing states 'easy to operate with online support available.' Specific control modes (onboard panel, remote, DMX, automatic) vary by model. Check the product manual or ask the seller which control modes and accessories are included with your unit.

The moving head jet cannon provides wide-area coverage and a focused jet for longer reach. Exact throw distance and spread depend on nozzle angle, machine height, foam fluid, and wind conditions. Use the moving head to sweep the foam across the target area for even coverage.

Coverage depends on foam density, how long you run the machine, and environmental conditions. As a rough guide, at full output you can quickly cover a medium-sized party area or pool surface; run time should be controlled to avoid excessive buildup. Test runs are recommended to determine ideal timing for your event.

Yes — the machine is commonly used at pool parties. Keep the unit a safe distance from the pool to prevent water ingress, secure all electrical connections with GFCI protection, and ensure guests are supervised to prevent slips and ingestion of foam.

Recommended precautions: use a GFCI outlet, keep the unit dry, prevent direct contact between foam fluid and eyes/mouth, supervise children, place the machine on a stable surface, control foam output to avoid slippery floors, and follow local health and safety regulations. Have first-aid supplies and a plan to rinse eyes or skin if needed.

Flush the fluid tank and pump with clean water after each use to prevent residue and clogs. Run clean water through the system and nozzle until clear. Wipe external surfaces dry, inspect hoses and connections, and store in a dry, cool place. Follow any additional maintenance steps in the user manual.

The product listing references a unit weight of 70 kg. Because it is heavy, use a trolley or lifting equipment and at least two people for safe moving. Secure the unit for transport and lift with correct techniques to avoid injury.

The machine uses a high-power (3000W) motor and a jet mechanism, so it will produce audible operational noise. It’s designed for events where some motor noise is normal. If noise is a concern, perform a test run and consider placement or sound dampening as needed.

Do not operate the machine in heavy rain or if there’s a risk of water entering the electrical components. If weather turns poor, turn off and disconnect power, cover or move the machine to a sheltered location, and allow it to dry before next use.

Availability of spare parts and accessories (nozzles, pumps, remotes) varies by seller and model. Contact your supplier for replacement parts, recommended fluids, and authorized service options. Keep the serial/model number handy when requesting parts or support.

Warranty and support terms depend on the seller or manufacturer. The listing mentions online support is available; confirm warranty length, coverage, and support channels with the seller before purchase.