1 Ton Feed Pellet Machine HJ-N350 | Livestock & Poultry Feed Pelletizer

The HJ-N350 is rated to produce approximately 800–1000 kg of feed per hour. Actual output depends on raw material type, moisture content, particle size and operating conditions.

'1 Ton' is a marketing designation referring to an approximate 1,000 kg/hour class. The machine's practical rated capacity is 800–1000 kg/hour under typical conditions.

The HJ-N350 is suitable for producing pellets for broilers, chickens, pigs, cattle and most other livestock and poultry when the feed formula is adjusted appropriately.

Machine dimensions: 1.5 × 0.6 × 1.1 m (L×W×H). Net weight/gross weight: 400 kg. Single package size: 150 × 60 × 110 cm; single package gross weight: 400 kg.

The machine requires a 380 V electrical supply (typically three-phase). For exact motor power and electrical connection details, consult the supplier or electrical schematic.

It can process common feed ingredients such as corn, wheat, soybean meal, bran, premixed feeds and many compound feed recipes. Highly fibrous or coarse materials may require pre-crushing or mixing.

Pellet diameter depends on the die installed. Common die sizes for feed range from about 2 mm to 8 mm. Contact the supplier to confirm available die sizes and to choose the correct die for your animals.

A moisture content of roughly 12–16% is ideal for most feed pelleting. Moisture outside this range can reduce pellet quality and output; adjust with drying or conditioning as needed.

Basic steps: (1) grind or mix raw materials to the correct particle size and moisture, (2) feed the mixed material into the machine hopper, (3) start the machine and adjust feed rate, (4) collect pellets, (5) cool and, if necessary, dry pellets before storage.

Perform daily cleaning of the die and feed areas, check and lubricate bearings regularly, inspect and replace wear parts (die, rollers, knives) as needed. Follow a preventive maintenance schedule as recommended by the supplier to ensure long service life.

Yes — replacement parts (dies, rollers, belts, etc.) and technical support are typically available from the manufacturer or authorized distributors. Contact your supplier for part numbers and lead times.

Always disconnect power before maintenance, keep hands and loose clothing away from moving parts, use provided guards, wear hearing protection and follow the operator manual and local electrical safety rules.

The machine is suitable for extended operation as part of a production line, but allow regular maintenance breaks per manufacturer guidance. Typically one trained operator is sufficient for routine operation.

The machine is packaged as a single item with package dimensions 150 × 60 × 110 cm and gross weight about 400 kg. Shipping options and costs depend on destination and carrier — contact the seller for a quotation.

For current pricing, lead times, warranty terms and to place an order, contact the manufacturer or authorized distributor. They can provide quotations including shipping, installation services and after-sales support.