Name: Switching Power Supply AC 110v-260v to 0-24V DC 2000W Active PFC High Efficiency Full Protection Smps Module
SKU: 1600289339523
Price: 5200 ZAR
Availability: InStock

2000W PFC

MODEL	IPS-PFC2000-24	IPS-PFC2000-36	IPS-PFC2000-48	IPS-PFC2000-60	IPS-PFC2000-72	IPS-PFC2000-110	IPS-PFC2000-150
Output parameters	DC output voltage	24V	36V	48V	60V	72V	110V	150V
AC 220V input	Rated output current	83A	55.5A	41.6A	33A	27.7A	18A	13.3A
	Rated output power	2000W	2000W	2000W	2000W	2000W	2000W	2000W
AC 220V input	Rated output current	62.5A	41.6A	31A	25A	20.8A	13.6A	10A
	Rated output power	1500W	1500W	1500W	1500W	1500W	1500W	1500W
conversion efficiency	88.5%	90.5%	91%	91%	91.5%	93%	93.5%
Ripple (full load)	200mv	230mv	250mv	250mv	280mv	300mv	350mv
Linear adjustment rate	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load adjustment rate	±1%	±1%	±1%	±1%	±1%	±1%	±1%
Voltage stabilization accuracy	±3%	±3%	±3%	±3%	±3%	±3%	±3%
Start-up, rise time	2S/300ms	hold up time:15ms
Input parameter	input voltage	AC 110v-260v (wide voltage adaptive, no conversion required)
AC input frequency	47-63Hz
Input current (maximum)	Full load 2000W output, using 220VAC input, input current 10A Full load 1500W output, 15A when using 110VAC input (when using 110V input, the maximum power is limited to 1500W)
power factor	Using AC220V input, when the power supply is 100% full load, the power factor PF value is ≥0.97 (refer to the PF curve diagram below) Using AC1100V input, when the power supply is 100% full load, the power factor PF value is ≥0.98 (refer to the PF curve diagram below)
Surge current	220VAC/45A 110VAC/22A
Function	PS-ON	PS-on terminal short circuit: no output voltage of power supply PS-on terminal open circuit: The power supply has an output voltage Note: PS-on can control the power output voltage on and off. When the output voltage is turned off, the power supply is in the low power standby state (less than 10 watts), and only the auxiliary power supply circuit is working inside. The cooling fan will operate normally, not the power supply of the 220 V input end will be disconnected.
Output voltage regulation	The output voltage is adjustable throughout the whole process, and the potentiometer V can be adjusted manually. You can also use an external 0-5V or 0-10V to adjust the output voltage (this function needs to be modified)
Output current regulation	The output current is adjustable. The potentiometer can be adjusted manually. When the load reaches the current setting value, the power supply will output in constant current mode
Protection function	Overload protection	The overload protection mode is the constant current limiting mode, the lock output current value remains unchanged, and the output voltage decreases with the increase in load
Output short circuit protection	After the output short circuit, there is no voltage output, and the output voltage will be automatically restored after the short circuit is removed
Output overvoltage protection	When the output voltage increases to 115% of the rated voltage, the power will be turned off Output, not automatically restored. To turn off the input voltage, wait for 10 seconds and then turn it on again
Overheating protection	When the temperature of the heat sink of the PWM transistor reaches 85°C±5%, the output voltage is turned off, and the temperature drops to 75°C±5%, and it will automatically recover
Security and EMC standard	EMC standard	MEET EN55022 CLASS B, EN61000-3-2
Insulation impedance	I/P-O/P,I/P-FG,0/P-FG:100M Ohms /500VDC /25℃/70%RH
Leakage current	≤3.5MA/AC220V
Withstand voltage	Input and output: 3000VAC Input and ground: 1500vac Between output end and housing: 500VAC
other	Heat dissipation mode	Fan heat dissipation (temperature control automatic speed regulating fan, double fan, internal air-blowing mode)
Cooling fan Noise value	In the indoor environment of about 25 dB, when two fans rotate at full speed, about 42 dB is measured at 50cm away from the power supply
working temperature	-30 ℃ – 45 ℃. To reduce power under a high-temperature environment, refer to the temperature load drop curve below
size	Length 280mm * width 140mm * height 65mm
weight	2.3kg (excluding package and accessories)
Installation hole position	The length spacing is 254MM and the width spacing is 122mm. Use external fittings bracket
Tips	1. Pay attention to ventilation and heat dissipation during use. Do not install the power supply in a fully sealed box. The heat dissipation outlet of the power supply and the fan inlet cannot be blocked by objects. 2. This power supply is only for indoor use, not rainproof, not waterproof, not dustproof, not for outdoor use, not suitable for high-temperature environments above 50 ℃

2000W PFC-D

Switching Power Supply AC 110v-260v to 0-24V DC 2000W Active PFC High Efficiency Full Protection Smps Module

Model List

Switching Power Supply AC 110v-260v to 0-24V DC 2000W Active PFC High Efficiency Full Protection Smps Module

Additional information

Weight	N/A
Output Power	2000W

Be the first to review “Switching Power Supply AC 110v-260v to 0-24V DC 2000W Active PFC High Efficiency Full Protection Smps Module”

Reviews

There are no reviews yet.

Leading Online Store in South Africa

Switching Power Supply AC 110v-260v to 0-24V DC 2000W Active PFC High Efficiency Full Protection Smps Module

Additional information

Reviews

Main Menu