MS-3B Plasma and Flame Cutting Machine Manufacturer Gas Cutting Machine

The MS-3B is a dual-mode cutting machine that supports both plasma cutting and oxy-fuel (flame) cutting, allowing selection of the best method for the material and thickness being processed.

The machine's specified cutting thickness range is 0.5 mm to 200 mm. Actual achievable thickness depends on the chosen cutting method, gas/consumable setup and material type (flame cutting is generally preferred for thicker carbon steel; plasma is ideal for thin to medium-thickness conductive metals).

Cutting speed is adjustable from 0.5 to 8,000 mm/min. The cutting precision is specified at 0.2 mm when properly set up and operated under recommended conditions.

The MS-3B can cut most metals. Plasma mode works on conductive metals such as mild steel, stainless steel and aluminum; flame (oxy-fuel) mode is best suited for cutting carbon/mild steel. For specialty alloys, consult the supplier for recommended gas/consumable settings.

Overall dimensions are 3200 mm (L) x 12,000 mm (W) x 2000 mm (H). The working area matches 3200 mm x 12,000 mm.

The machine operates on 220 V and has a rated power of 1000 W. Note that the plasma power supply and gas supply systems are separate and must meet the specifications for the selected cutting method.

The machine is controlled with the Fangling F2300A system, which supports common cutting controls and job execution. For file compatibility and advanced features, check with the supplier about supported file formats (DXF/NC/G-code) and software options.

Typical consumables include plasma torch electrodes, nozzles, shield cups and oxy-fuel tips and valves. Routine maintenance includes cleaning rails and drive components, checking and replacing worn consumables, inspecting cables and gas lines, and lubricating gears and bearings per the manufacturer manual.

Consumable life varies with material, cutting current, and operating conditions. Light use may allow weeks of service, while heavy production use may require replacement after hours or days. Monitor cut quality and maintain a supply of common consumables; follow the manufacturer's guidelines for replacement intervals.

Operators should use appropriate PPE: welding/cutting helmet or goggles, flame-resistant clothing, gloves, and hearing protection. Ensure good ventilation or fume extraction, proper grounding, gas leak checks, and follow standard hot-work and fire-prevention procedures. Only trained personnel should operate the machine.

The machine weighs approximately 1,500 kg. Installation typically requires a solid, level foundation, adequate clearance for the working area, access for gas and electrical hookups, and equipment (forklift/crane) to move and position the machine safely. Professional installation is recommended.

Yes — as a straight-type cutting machine with the Fangling F2300A control, the MS-3B is suitable for production environments. Integration capabilities (conveyors, loading/unloading automation, network connectivity) depend on configuration and should be discussed with the manufacturer or integrator.

Service offerings vary by supplier. Typically, manufacturers or authorized dealers provide installation, operator training, commissioning and after-sales support. Contact the vendor for specific service packages, response times and warranty terms.

Cut quality depends on correct selection of cutting method, gas type and pressure, torch height and alignment, cutting speed, clean material surface, and good machine maintenance. Use recommended consumables, calibrate torch height controls, and run test cuts to dial in parameters for optimal results.