B21, China Town Mall, Midrand
Mixing Peristaltic Mortar Plastering Fireproof Machine
- Section : Machinery
- Category : Engineering & Construction Machinery
- SKU : 1600517032786
| Power | 220v 800w |
| Air compressor power(kw) | 2.2kw |
| Levels of transmission capacity | 30m |
| Vertical transmission capacity | 15m |
| Speed rpm | 300rpm/min |
| Hopper volume | 25L |
| Delivery pressure | 2MPA |
| Length of spraying tube | 50m |
| Nozzle diameter | 4mm 6mm 8mm |
Click here for more information:
- Shipping Timeframes: All orders are processed within 2-5 business days (excluding weekends and holidays). After your order has been processed, the estimated delivery time is before 03 Feb, 2026, depending on customs, Please note that due to high demand, some items may experience longer shipping times, which will be communicated at order confirmation email.
- Order Processing Time: Please allow 2-5 business days for us to process your order before it is shipped . Orders placed after 16:00 on Fridays, or during weekends and public holidays, will begin processing on the next business day. Processing times may be extended during peak seasons or sales events.
- Manufacturing Time: Some products needs manufacturing time, the manufacturing process will take approximately 10-30 business days depending on the product. This timeframe may vary depending on the complexity of the product and current demand. but this will be communicated with you during order confirmation.
- Returns and Exchanges: We offer a 30-day return policy for most items. If you are not completely satisfied with your purchase, you may return it within 30 days of receipt for a refund or exchange. Items must be unused, in their original packaging, and accompanied by proof of purchase. Return shipping costs are the responsibility of the customer, unless the item was damaged or defective upon arrival.
1. What is the Mixing Peristaltic Mortar Plastering Fireproof Machine used for?
It's designed to mix, pump and spray cementitious mortars, plasters and fireproof coatings for building facades, fireproofing works and repair jobs where consistent, continuous spraying is required.
2. What are the electrical and compressor power requirements?
The unit runs on 220 V and draws 800 W. It requires an external air compressor with about 2.2 kW power to operate the spraying system.
3. What materials can this machine handle?
Suitable for cement-based mortars, render/plaster, fireproofing mixes and similar cementitious materials. Avoid mixes with oversized aggregate, very fibrous materials or large debris that can clog the nozzle or damage the hose.
4. What are the maximum pumping distances (horizontal and vertical)?
Maximum horizontal (transmission) capacity is 30 m and maximum vertical transmission capacity is 15 m. The supplied spraying tube length is 50 m — actual usable distance depends on mix viscosity and nozzle size.
5. What nozzle sizes are available and how do I choose?
Nozzle diameters available: 4 mm, 6 mm and 8 mm. Use smaller nozzles for finer, thin mixes and finer finishes; use larger nozzles for thicker mixes or higher output. Ensure aggregate/particle size is well below the nozzle diameter.
6. What is the machine's hopper volume and how much material should I load?
Hopper volume is 25 L. Do not overfill beyond the marked capacity; add material in recommended batches and keep consistency within manufacturer guidelines for smooth pumping.
7. What delivery pressure and pump speed does it have?
Delivery pressure is rated at 2 MPa (about 20 bar) and the pump speed is 300 rpm. Actual spray performance depends on mix, nozzle size and hose layout.
8. How do I clean the machine after use?
Immediately after use, flush the hopper, pump hose and spray tube with clean water until clear. Remove and clean the nozzle and inspect the peristaltic hose. Do not allow cementitious material to harden in the system.
9. What routine maintenance is required?
Regularly inspect and replace the peristaltic hose/tube and seals as they wear. Check nozzle condition, hose clamps and fittings. Keep the motor and gearbox area free of dust, and follow the manufacturer's recommended service intervals.
10. How do I troubleshoot low flow or clogging?
Check for nozzle blockages and clear or replace the nozzle. Verify mix consistency (too thick causes clogging). Inspect the spray tube and peristaltic hose for wear or obstructions and ensure compressor pressure and power supply are stable.
11. What safety precautions should I follow?
Wear PPE (eye protection, gloves, mask and protective clothing). Ensure the machine is properly grounded. Turn off power and depressurize the system before maintenance. Keep hands and tools away from moving parts.
12. Can I use ready-mix or factory-prepared mortars?
Yes, provided the product is suitable for pumped/sprayed application and has appropriate particle size and consistency for the chosen nozzle. Follow mix manufacturer's guidance for pumping applications.
13. What spare parts and accessories are commonly needed?
Common spares: peristaltic hoses/tubes, nozzles (4/6/8 mm), nozzle tips, hose clamps, seals and gaskets. Optional accessories: longer/shorter spray tubes, spare spray guns and compressor-compatible fittings.
14. How do I set up the machine for first-time use?
Place the unit on stable ground, connect to a 220 V grounded outlet, connect the air compressor (2.2 kW recommended), fit the correct spray tube and nozzle, fill the hopper with properly mixed material, prime the pump and perform a test spray on a waste surface.
15. What warranty or after-sales support is available?
Warranty terms and support vary by seller/manufacturer. Check the product manual or contact the supplier for details on warranty coverage, spare parts availability and authorized service centers.
Latest Order Arrivals
Discover our latest orders
12 Heads Embroidery Machine
Dewatering Pump Machine
Order Collection
Portable Water Drilling Rig
Order Usefully Collected
Batch of Orders
Agriculture Processing Machines
Meat Grinder Machine
Water Pump Equipment
Packaging Machine and accessories
Fabrics Manufacturing Equipment
Mining Equipments
Food Processing Machine
Batch of Orders
Batch of Orders
Latest Orders Labelled
wheel alignment machines
new arrivals
Pre Orders Offloading
Latest Arrivals
Latest Arrivals
