Full Automatic Wood Finger Joint Machine Finger Joint Shaper for Finger Joint Clamp Machine Woodworking Machine

It is a fully automatic woodworking machine that cuts and shapes precise finger joints and applies glue, used to produce strong joints for furniture, cabinetry and wood construction components.

Key specs: electrical power 16.5 kW, voltage 380V/50Hz (custom voltages available), weight 2000 kg, air pressure 0.6–0.8 MPa, max working width 600 mm, max thickness 150 mm, main saw spindle diameter 30 mm, shaper spindle diameter 70 mm, scoring saw spindle speed 2840 r/min, overall dimensions 2700×1730×1550 mm.

It is suitable for most solid woods and common engineered/laminated wood materials used in furniture and construction. Very hard, resinous or unusual species should be test-cut or discussed with the supplier before full production.

Maximum working width is 600 mm and maximum working thickness is 150 mm. Larger or irregular pieces are not recommended without consultation.

Standard supply is 380V/50Hz (three-phase). Total machine power is 16.5 kW. Pneumatic supply should be 0.6–0.8 MPa; provide an air compressor with adequate flow and dryer/filters for stable operation.

Yes — the machine is equipped with an automatic gluing device. It is compatible with common woodworking adhesives; consult the supplier to confirm compatibility with a specific glue type (PVAc, PUR, etc.) and recommended viscosity/settings.

The machine is described as fully automatic for ease of use. However, line integration, feeding conveyors or infeed alignment may be required depending on your production layout.

Use built-in guards and emergency stop controls, and ensure operators wear appropriate PPE (safety glasses, hearing protection, dust masks/gloves). Install dust extraction and follow local machine-safety regulations. Provide operator training before use.

Daily: clean chips and adhesive residue, check guards and emergency stops. Weekly: check and lubricate moving parts, inspect belts and hoses. Monthly: check spindle runout, blade/cutter condition and glue system lines. Replace blades/cutters and wear parts as needed.

Relevant spindle specs: main saw spindle diameter 30 mm, shaper spindle diameter 70 mm, scoring saw spindle speed 2840 r/min. Use cutters and blades sized for those spindles and follow supplier recommendations for RPM and feed rates.

The machine is designed to work with finger joint clamp machines and woodworking lines. For smooth integration, confirm conveyors, alignment, cycle timing and model compatibility with the supplier before purchase.

The machine weighs about 2000 kg and dimensions are 2700×1730×1550 mm. A level, solid concrete floor and adequate clearances are required. Use a forklift or crane for placement and secure the machine with anchor bolts as recommended by the supplier.

Throughput depends on workpiece size, joint design and feed speed. The machine's high spindle speed (2840 r/min) and 16.5 kW power support efficient processing; request performance data or run sample parts with the supplier for accurate estimates.

Most suppliers offer spare parts, technical support and operator training. Confirm warranty terms, spare-parts availability and lead times with the vendor prior to purchase.

Overall dimensions and 2000 kg weight require heavy-equipment handling. Packaging and shipping options vary; contact the supplier for crate details, container suitability, insurance and on-site delivery requirements.