Durable Hydraulic Ironworker Machine High Efficiency Punching and Shearing Machine

The machine is hydraulically driven with an electric motor. Voltage options listed are 220 / 380 / 400 / 415 V (typically three-phase). Motor and total power are rated at 5.5 kW. Confirm required phase and wiring with your supplier/installer before connection.

Punching: maximum punch diameter up to 30 mm and punch thickness up to 20 mm. Shearing: flat steel up to 20 mm thick and 330 mm wide. Actual capacity can vary with material type; always test or consult the supplier for specific materials like stainless steel.

The spec sheet lists a nominal force of 360 kN and a press force of 90 t. These two figures appear inconsistent (360 kN ≈ 36.7 t). Please verify the rated press force with the manufacturer/supplier to confirm the correct value.

Machine dimensions (L×W×H) are 1640 × 800 × 1990 mm. Gross weight is approximately 2,200 kg (2.2 t). Packaged size listed as 164 × 80 × 199 cm.

Stroke speed is listed as 12 times per minute. Slide travel (ram travel) is 80 mm which determines the working stroke range.

The specification gives a throat depth of 355 mm (listed as 'laryngeal mouth' in the sheet). This is the maximum distance from the punch centerline to the back of the throat.

Yes — it is described as having a user-friendly interface and straightforward hydraulic controls. However, operator training and reading the manual are recommended to ensure safe and optimal use.

Typical safety provisions include guarded moving parts, emergency stop, and safety interlocks (confirm exact features with supplier). Always use appropriate PPE (safety glasses, gloves, hearing protection), follow lockout/tagout procedures during maintenance, and ensure guards are in place during operation.

Routine maintenance includes checking and replacing hydraulic fluid and filters per the manual, inspecting seals, bolts and tooling for wear, lubricating moving parts, and monitoring hydraulic pressure. A common practice is to check fluid and filters monthly and change hydraulic oil at manufacturer-recommended intervals—consult the supplied maintenance schedule.

Common ironworker tooling includes punch and die sets in various diameters, shear blades (flat/angle), notchers, angle/channel shears, and specialty dies. The machine accepts standard punch sizes up to the listed capacities; contact the supplier for compatible tooling and optional attachments.

Yes, it can process many metals, but maximum thickness and quality depend on material hardness and alloy. Thicker or harder materials (e.g., certain stainless grades) may require reduced capacity or specialized tooling—consult the supplier for guidance and testing.

A level, solid floor (typically concrete) and proper anchoring are recommended to ensure stability and reduce vibration. Exact anchoring requirements should be confirmed with the supplier and installation technician.

Warranty terms and after-sales support can vary by seller and region. The product brand is Hongyin; contact your supplier or the manufacturer to confirm warranty length, coverage, spare parts availability, and options for on-site installation or training.

Package size is approximately 164 × 80 × 199 cm with a gross weight around 2,200 kg. Prepare suitable lifting equipment (forklift/crane), floor space, and a cleared route for delivery. Coordinate with the supplier for crating, customs paperwork, and delivery instructions.

Yes — many suppliers offer electrical configurations, tooling packages, and optional attachments to match local voltage, phase, and application needs. Contact the manufacturer or your sales representative to discuss customization, options, and lead times.