Production Description

Introduction:
Our water leak detection system can avoid economic loss and expansion of damage caused by water leakage. It will alarm and shut off the electric valve once the water sensor detected water leaking.
The valve can stop the pipe water then. Usually suitable for underground reservoir of high building SPA and so on. You can also place it near toilets, basements, washing machines, air-condition machines, refrigerators, dishwashers,sinks,aquariums, sump pumps, water heaters, and anywhere with potential water damage. This protects your home by keeping the leak alert anywhere water leak is a potential danger.

Important note:
As the valve is immersed in water for a long time, it needs self-inspection under the condition of power supply, that is to say,the water control host will control the smart valve automatically closed in every month and then automatically reopen, which is to check whether the valve function can work normally or not.

Specifications:
Valve Size (pipe size) : DN25 (1")
Working Voltage: DC5V
Power input: 100-240V
Output Power: <5w
Open/Close Time: <5s
Working Pressure: <1.0MPa
Lifetime: >50000 times
Medium Temperature: 0-90°C
IP Rating: IP65
Alarm Startup Time: 1s
Valve Close Startup Time: 1s

Package Content:
1. 1pc Water Leak Detector
2. 2pcs Brass Motorized smart valves DN25 (1") (BSP valve or NPT valve for choice)
3. 1pc 10cm length valve splitter
4. 4pcs 6-meter long Water Sensors
5. 1pc English Manual
6. 1pc 5V Power Adapter ( Eu plug and US plug for option)

The water controller measurement is 11cm x 6.7cm x 2.1cm. This water controller can connect one
valve or two valves. This control unit has 8pcs water sensor jack. No matter which water sensor detect the water leakage, all the two valves will close immediately at the same time. And the water sensor's LED light indicator will also flash once detecting the water leakage.

Even the system without valve, the central unit will still operate, detect water leakage and sound warning tone. Central unit is not waterproof. Therefore please do not place the unit at where water may flow.
Do not place Sensor terminals on the metallic objects that may cause false warning sound.

The valve splitter cable was used to connect two smart valves to the water controller at the same time. The valve splitter cable length is 10cm long.

The 5pin smart valve just can be compatible with our WLD-808 water leakage system. The valve's cable length is 1-meter long. 

The smart valve blue part actuator measurement is about : 6.5cm x 5cm.
The smart valve's brass part's length measurement as below picture shows:
DN15 (1/2") : 5.5 cm
DN20 (3/4") : 6 cm
DN25 (1") : 7 cm 

This system use 5V power adapter , it only can be compatible with our store's water leakage system WLD-808 and WLD-809. This plug has EU plug and US plug for option.

The white water sensor can use on our store's water leakage system WLD-805, WLD-806,WLD-807,WLD-808. This water sensor's length is 6-meter long.