Comb and Tenon Joint Machine Wood Finger Board Jointing Machine

It is used to create precise, strong finger (comb and tenon) joints in wood, suitable for furniture, cabinetry, building materials, crafts and industrial wood jointing.

Maximum working length is 2500 mm, maximum working width is 150 mm, and maximum working thickness is 70 mm.

The machine uses electrical power with two motors rated at 1.5 kW + 1.5 kW. Confirm required voltage and phase with the supplier for your region.

The saw shaft speed is 3600 rpm, enabling high-speed processing for efficient cutting.

Overall dimensions are 3600 x 860 x 1500 mm and the machine weight is approximately 600 kg.

Yes — it is designed for ease of operation and is suitable for all skill levels, though basic training and practice are recommended for best results.

It can process most common softwoods and hardwoods within the specified size limits. Harder, denser species may require appropriate cutters and slower feed rates.

Use required PPE (safety glasses, hearing protection, dust mask), ensure guards and emergency stop are functional, keep hands clear of cutters, use push devices or clamps, and disconnect power before maintenance.

Regular maintenance includes cleaning chips and dust, checking and sharpening/replacing cutters, lubricating moving parts per the manual, inspecting belts/drive components, and ensuring electrical connections are secure.

Yes. Proper dust extraction is strongly recommended to maintain air quality, extend cutter life, and keep the machine clean and safe.

Common accessories include cutterheads or finger cutters, saw blades, clamps or jigs for consistent feeding, fences, and a dust extractor. Keep spare cutter blades and drive belts on hand as consumables.

Allow clearance beyond the machine footprint (3600 x 860 x 1500 mm) for loading/unloading, operator access and dust extraction. Due to the 600 kg weight, a prepared level floor and forklift or lifting equipment are recommended for installation.

Confirm local voltage and phase requirements with the supplier. A properly grounded electrical circuit with appropriate breakers and professional wiring is required. The machine has two 1.5 kW motors — ensure supply capacity and correct connections.

Yes. Joint profile, size and spacing are set by the cutter configuration and machine adjustments. Make test cuts and fine-tune fences, feed settings and cutter positions to achieve the desired finger joint dimensions.

Warranty and after-sales service terms are not specified here. Contact the seller or manufacturer for details on warranty coverage, spare parts, technical support and on-site installation or training options.