Asphalt Road Milling Construction Equipment LDS-500

The LDS-500 is a concrete scarifier and asphalt milling machine designed for surface preparation tasks such as removing asphalt or concrete toppings, removing line paint, cleaning road surfaces, and profiling or texturing concrete and asphalt.

The LDS-500 is offered in multiple power configurations. Common options include a gasoline engine (Honda), an electric motor, and a diesel variant (listed as Diesel CF25 17 kW). Confirm the exact power configuration when ordering.

Scarifying depth is adjustable from 0 to 10 mm, allowing fine control for light surface removal up to deeper milling within that range.

Walking speed is adjustable from 0–30 m/min (infinitely variable via hydraulic transmission). Typical working efficiency is rated at approximately 230 m²/hour, dependent on material and operating conditions.

The machine uses a hydraulic stepless (infinitely variable) transmission for walking and torque management. Depth is controlled via electric lifting controls for precise adjustment.

The LDS-500 uses a high-speed rotating multi-point cutting drum with a standard knife hub width of 500 mm and 270 cutting blades. The drum is heat-treated for durability and is designed for fast replacement.

The scarifying drum is engineered for quick replacement and can be changed in approximately five minutes, minimizing downtime on the jobsite.

Overall size is 1600 × 830 × 950 mm and the machine weight is approximately 380 kg. It can be transported on a light truck or trailer; use appropriate lifting equipment and securement for safe transport.

Daily: inspect cutters, remove debris, check hydraulic lines and fluid levels, and verify controls. Periodically: replace worn blades, service the engine/motor per manufacturer guidelines, and check drum bearings and fasteners. Follow supplier maintenance schedule for hydraulic fluid and engine service intervals.

Operators should wear hearing protection, eye protection, gloves, protective footwear, and dust/mist masks or a respirator when cutting dusty materials. Ensure good ventilation, keep bystanders clear, and follow lockout/tagout procedures for maintenance. Read the operator manual for full safety instructions.

Yes. The LDS-500 is suitable for both asphalt and concrete surface preparation and milling tasks within its depth and cutter configuration limits.

Blade life depends on material, application, and operator technique. Harder or abrading surfaces and improper use shorten life. Replacement blades and cutter kits are available from the supplier — keep spare cutters on hand for continuous operation.

Scarifying and milling generate dust and noise. Use appropriate dust control measures (water suppression or vacuums where applicable) and PPE for operators. Noise levels vary by engine type and cutting conditions; refer to the supplier for measured sound levels of your chosen power configuration.

Common accessories include spare cutter sets, replacement drums, dust control attachments or collection systems, transport brackets, and different cutter geometries for specific materials. Contact the dealer for compatible accessories and retrofit options.

Warranty terms and local service availability vary by seller and region. Ask your supplier or dealer for specific warranty coverage, authorized service centers, and spare parts availability before purchase.