AG Sonic Ultrasonic Gun Cleaner

The AG Sonic Ultrasonic Gun Cleaner (model T-30S) is an industrial-grade ultrasonic cleaning machine designed to degrease and clean firearm parts and other precision equipment by using high-power ultrasonic cavitation combined with heat to remove dirt, carbon, oil and other contaminants.

Model T-30S features a stainless steel tank (800 x 300 x 400 mm) with 100 L capacity, 1500 W ultrasonic power, 3 kW heating power, 30 transducers, selectable power settings, and operates at 28/40 kHz frequency. It supports AC110–130V and AC220–240V 50/60 Hz supplies and includes a digital timer and heater controls.

Yes — the unit is designed for cleaning firearm components. Always fully disassemble firearms per manufacturer guidance, remove all ammunition and primers, remove batteries and sensitive electronics, and avoid submerging parts that the gun manufacturer advises against (such as wooden grips or certain coatings) unless you confirm compatibility.

Use dedicated ultrasonic gun-cleaning solutions or mild, water-based degreasers that are non-flammable and ammonia-free. Strong solvents, flammable liquids, or caustic chemicals should be avoided unless explicitly allowed by the machine and solution manufacturer.

Typical cleaning temperatures are warm (roughly 40–60 °C) to improve degreasing effectiveness; the built-in 3 kW heater lets you reach and maintain these temperatures. Cycle times commonly range from 5 to 20 minutes depending on soil level — heavily contaminated parts may require repeated cycles or longer exposure.

This model supports ultrasonic action in the 28 kHz and 40 kHz ranges. Lower frequencies (around 28 kHz) produce larger cavitation bubbles that are more aggressive for heavy contamination; higher frequencies (around 40 kHz) produce finer cavitation better for delicate or intricate parts. The choice helps balance cleaning power and part safety.

Ultrasonic cleaning is generally safe for many metal finishes, but some coatings or surface treatments can be sensitive. Test a small inconspicuous area first or consult the firearm/coating manufacturer. Use milder power settings and shorter cycles for delicate finishes.

Yes. Use stainless steel baskets, trays or fixtures to keep parts off the tank bottom, prevent rattling, and allow solution circulation. Specialty fixtures (e.g., bore adapters) help clean bores or hard-to-reach areas more effectively.

Change the solution when it becomes visibly dirty or loses effectiveness — typically after several cleaning cycles. Regularly drain and rinse the tank, wipe dry, and inspect transducers and wiring. Remove debris and sediment from the bottom to prevent transducer damage.

The machine supports AC110–130V and AC220–240V at 50/60 Hz, making it usable in different regions. Check the unit’s label and manual to confirm how the voltage selection is implemented (auto-switching or manual selector) before plugging in.

Yes — ultrasonic cleaning can clean bores effectively, but best results often require appropriate bore fixtures, rods or bore-specific adapters and solutions. Ensure barrels are secured and oriented as recommended, and verify compatibility of any bore-mounted components or brushes.

Transducers are robust but require care: avoid running the unit dry, keep the tank free of heavy debris, and follow the manufacturer’s maintenance schedule. Lifespan depends on use and care; for repairs or replacement contact the manufacturer or authorized service — do not attempt internal repairs if you are not qualified.

Yes. Always remove live ammunition and batteries from parts, use only approved cleaning solutions, avoid flammable liquids, never run the tank dry, ventilate the area when using cleaning chemistries, and follow electrical safety (correct voltage, grounded outlet). Wear gloves and eye protection when handling contaminated parts and solutions.

The T-30S includes adjustable ultrasonic power settings, a digital timer and heater controls so you can tailor cavitation intensity, temperature and cleaning duration to the part type and soil level.

The tank is made from high-quality stainless steel (SUS304/316). SUS316 offers superior corrosion resistance for harsher solutions and longer service life; stainless construction ensures chemical resistance, durability and easy cleaning for industrial use.