The Diesel Powered Feed Hammer Mill Machine for Corn Maize Grain Grinding and Animal Feed Processing is a diesel-driven crusher for farms and feed processors that need to grind corn, maize, grains and straw into animal feed. It works without grid electricity, delivers a rated capacity of 1000 kg/h, and produces output in a stated 1–30 mm size range.
At a glance
Best suited to: Farms, livestock operations and feed factories processing their own animal feed
Input material: Grains and straw
Final product: Ground animal feed in 1–30 mm sizes
Rated capacity: 1000 kg/h
Construction: Q235, metal and iron with thickened plate and reinforced support
Warranty: Two years
What is Diesel Powered Feed Hammer Mill Machine for Corn Maize Grain Grinding and Animal Feed Processing?
It is a diesel-powered grinding machine used to reduce corn, maize, other grains and straw into feed material for animal feeding applications. In practical terms, it helps a user turn raw agricultural inputs into a smaller, usable feed form on site, without depending on an electrical connection.
This machine is listed as a crusher, so buyers should read it primarily as a size-reduction machine rather than a complete feed manufacturing plant. It grinds feed raw materials into a stated size range of 1–30 mm, but the published product information does not describe any mixing, dosing, cooling, bagging or finished pellet handling stages. Buyers planning a full feed line should therefore treat this unit as one processing step and confirm what additional equipment is required.
The verified construction details point to a machine intended for agricultural duty. Its body uses Q235, metal and iron, and the fuselage structure is described as a thickened plate with reinforced support. The product page does not identify a named control system or instrumentation package, so buyers who need a specific control arrangement should request the exact operating and starting controls included in the quoted configuration.
How does Diesel Powered Feed Hammer Mill Machine for Corn Maize Grain Grinding and Animal Feed Processing work?
It works by feeding agricultural material into a diesel-driven grinding system that reduces the material to a selected output size range for animal feed use.
Material feeding: The operator introduces grains or straw into the machine for processing. The listing confirms these two feed raw material categories, which makes the machine relevant for users preparing feed from common farm residues and cereal crops.
Diesel-powered operation: The machine runs on diesel, allowing feed grinding where electricity is unavailable, unstable or impractical. This is important for buyers operating in remote agricultural areas or at sites where three-phase electrical infrastructure is not in place.
Crushing and grinding: As a crusher, the unit reduces the incoming material into smaller particles suitable for feed preparation. The published information confirms that it is supplied with 6 blades, which are part of the verified cutting or grinding assembly.
Size formation: The machine produces output within a stated 1–30 mm size range. The listing also states 6 molds and 4 rollers, indicating that the configured machine includes these components as part of its supplied assembly.
Feed output: The processed material exits as animal feed material at a rated capacity of 1000 kg/h, subject to the raw material and the selected output requirement. As with any grinding equipment, buyers should confirm whether the quoted capacity applies to a particular grain type and output size before purchase.
The product listing does not specify any confirmed feeder type, cyclone, dust collection system, discharge conveyor, bagging arrangement or spare screen set. Buyers should confirm the complete supply scope in writing before ordering, especially if the machine will be integrated into an existing feed preparation line.
Where is Diesel Powered Feed Hammer Mill Machine for Corn Maize Grain Grinding and Animal Feed Processing used?
It is used anywhere agricultural operators need to reduce grain or straw into feed material quickly and independently of mains electricity.
Livestock farms producing on-site feed: Farms keeping poultry, pigs, cattle or mixed livestock often need a practical way to process their own feed ingredients. A diesel-powered machine with a stated 1000 kg/h capacity can support on-farm feed preparation where purchased feed is costly or where transport from urban feed suppliers is unreliable.
Rural grain and feed processing points: In many agricultural districts, operators collect grain and crop residues from surrounding growers and process them into feed products locally. Because this machine runs on diesel, it can fit locations where electrical supply is intermittent or absent, reducing dependence on grid availability.
Commercial feed factories needing a stand-alone grinder: Smaller feed factories may require a dedicated crushing stage for grains and straw before further processing. The machine’s role as a crusher, together with its 1–30 mm output range, can make it useful as a front-end size reduction unit in a broader feed workflow.
Mixed farming operations using crop residues: Farms that produce both crops and livestock can convert part of their own straw and grain harvest into feed material. That matters where buyers want more value from farm residues rather than treating them only as waste or low-value by-products.
Contract feed milling services: Some agricultural entrepreneurs process feed for neighbouring farms as a paid service. A unit sold as a single item with MOQ 1 set may suit operators entering the market with one machine before scaling to multiple processing points.
Agricultural cooperatives and community projects: Cooperatives serving several members often need robust, shared processing equipment. The machine’s thickened plate and reinforced support construction are relevant here because shared-use equipment typically faces heavier wear and more varied operators than privately used units.
Sites with limited civil works capacity: The listing states no special foundation is required. That can simplify deployment for agricultural businesses that want to install a grinding machine quickly without major concrete works or highly specialised site preparation.
Projects requiring imported equipment support: The published logistics terms include booking and customs assistance, with FOB, EXW or CIF negotiable and shipment through any main port in China. For African buyers importing machinery into inland or coastal markets, that support can help reduce procurement friction during shipping and customs planning.
Technical specifications
The following table summarises the verified product information published for the Diesel Powered Feed Hammer Mill Machine for Corn Maize Grain Grinding and Animal Feed Processing, Afrimart SKU 10000036642637.
| Specification | Verified value | Buyer note |
|---|---|---|
| Brand name | Kawise | Use the brand name and SKU together when requesting a formal quotation. |
| Afrimart SKU | 10000036642637 | Useful reference for quotation matching and document control. |
| Type | Crusher | Indicates a size-reduction machine rather than a complete feed plant. |
| Condition | New | Confirms the machine is sold as new equipment. |
| Rated capacity | 1000 kg/h | Confirm which raw material and output size this figure relates to. |
| Feed raw material | Grains, Straw | Ask Afrimart to confirm the exact grain types you plan to process. |
| Output size | 1–30 mm | The listing uses the label pellet size; buyers should confirm how output size is selected on the machine. |
| Number of molds | 6 | Confirm what these molds correspond to in the supplied configuration. |
| Number of rollers | 4 | Ask how the rollers function within this crusher configuration. |
| Number of blades included | 6 | Confirm whether these are installed blades only or include spare blades. |
| Material | Q235, Metal, Iron | Q235 is a commonly used carbon structural steel designation. |
| Fuselage structure | Thickened Plate, Reinforced Support | Relevant to rigidity and durability in agricultural duty. |
| Weight | 270 kg | Confirm whether this is the machine net weight for handling and installation planning. |
| Single gross weight | 800.0 kg | Gross weight is relevant for shipping, not necessarily operating mass. |
| Single package size | 165 x 180 x 120 cm | These are package dimensions, not confirmed operating dimensions. |
| Selling units | Single item | Useful for single-machine procurement planning. |
| MOQ | 1 set | Minimum order quantity supports one-machine purchases. |
| Warranty period | Two years | Buyers should request the written warranty scope and exclusions. |
| Quality control | Full test before shipment | Ask what test records or acceptance evidence can be supplied. |
| Sample policy | No free sample machine | Relevant for budgeting and evaluation expectations. |
| Installation requirement | No special foundation | Confirm floor loading, anchoring and access needs before installation. |
| Logistics support | Booking and customs assistance | Useful for buyers importing into African ports and inland destinations. |
| Freight basis | CBM based | CBM means cubic metre; this affects freight calculation. |
| Price term | FOB or EXW or CIF negotiable | Confirm the chosen Incoterm in the written quotation and shipping documents. |
| Nearest port | Any main port in China | Buyers should state their preferred shipment routing in the enquiry. |
Specifications may vary according to configuration and should be confirmed in Afrimart’s current written quotation before order placement.
What are the main operational benefits?
Off-grid feed processing capability: Because the machine runs on diesel, it can support feed preparation where mains electricity is unavailable or unstable. That can widen the choice of installation sites for farms and rural processing operations.
Useful production throughput: The verified 1000 kg/h rated capacity gives buyers a concrete planning figure for matching the machine to daily feed demand. It is especially relevant for operations that need faster output than small manual or household-scale mills can provide.
Flexible output size range: The stated 1–30 mm output range gives buyers a basis for discussing target feed texture with Afrimart. This can matter when different livestock categories require different feed particle sizes.
Robust agricultural construction: The machine uses Q235, metal and iron, with a thickened plate and reinforced support fuselage structure. In operational terms, that points to a design intended for repeated handling of agricultural materials rather than light domestic use.
Supplied working components: The listing confirms 6 molds, 4 rollers and 6 blades included. For procurement teams, named included components are useful because they define part of the delivered machine content and help avoid ambiguity at quotation stage.
Simplified site preparation: The installation requirement states no special foundation. While buyers still need to check floor capacity and safe access, this may reduce civil works complexity compared with heavier process plant that needs a dedicated engineered base.
Import support for cross-border buyers: The published offer includes booking and customs assistance and negotiable FOB, EXW or CIF terms. That operationally matters for African buyers coordinating shipping, customs clearance and inland transport across multiple service providers.
Why does this equipment matter for African industry?
This kind of machine matters because it supports local agricultural value addition using materials that many African farms already produce: maize, other grains and straw. Instead of moving all raw material out and buying all feed back in processed form, some operations can process part of their feed requirement closer to where the crops and livestock are located.
Its diesel-powered design is especially relevant in markets where power reliability differs sharply by region. Africa is not one operating environment: some buyers work in industrial zones with established utilities, while others operate in remote farming areas where diesel remains the practical energy source for essential equipment. In those contexts, a machine that does not depend on a fixed electrical connection may help keep feed preparation running when grid access is limited.
The machine also aligns with the broader need for more local processing capacity. Livestock growth in many African markets increases demand for dependable feed supply, and feed quality starts with consistent raw material preparation. A crusher with a stated 1000 kg/h capacity can form part of a decentralised processing model for farms, cooperatives and smaller feed enterprises.
There is also a waste-reduction angle. Because the verified feed inputs include straw, buyers may be able to make more productive use of some crop residues. That does not remove the need to confirm nutritional suitability and feed formulation separately, but it does show how basic processing equipment can support better use of available agricultural materials.
Finally, relatively straightforward installation requirements matter. The published statement that the machine needs no special foundation may make it more accessible for buyers who want practical processing equipment without the high civil engineering demands associated with larger industrial plant.
What should buyers confirm before ordering?
- Required throughput per hour and per day
- Main feed ingredients to be processed
- Whether the duty is mainly maize, mixed grains or straw
- Required finished particle size within the 1–30 mm range
- Whether one machine will meet peak seasonal demand
- Exact function of the 6 molds in the quoted configuration
- Exact function of the 4 rollers in the quoted configuration
- Whether the 6 blades include any spare set
- Diesel engine specification and starting method
- Fuel consumption data for the quoted machine
- Full machine operating dimensions, not only package size
- Net machine weight and lifting points
- Floor loading, anchoring and installation layout
- Hopper, discharge and material handling arrangement
- Dust management and housekeeping requirements
- Noise and operator safety provisions
- Recommended wear parts and spare parts package
- Routine maintenance points and service intervals
- Warranty scope, exclusions and claim procedure
- Shipping term, destination port and inland delivery plan
- Customs documentation needed for the destination country
- Installation, commissioning and operator training scope
The most consequential unstated figure for many buyers is the diesel engine specification, including power rating and fuel consumption. Request a current written quotation with a detailed technical offer or datasheet so the exact installed engine and machine configuration are confirmed before purchase.
How to source Diesel Powered Feed Hammer Mill Machine for Corn Maize Grain Grinding and Animal Feed Processing through Afrimart
Afrimart can help buyers confirm whether this diesel feed grinder matches the intended application and can prepare a quotation for the required configuration. That matters because the published listing gives a solid starting point on capacity, materials and shipping terms, but buyers still need project-specific confirmation on the exact machine build, supplied accessories and engine details.
When requesting a quotation, provide:
- Required capacity
- Intended application
- Input materials
- Project location and country
- Available utilities
- Required accessories
- Installation and training requirements
- Target project date
Request a quotation for Diesel Powered Feed Hammer Mill Machine for Corn Maize Grain Grinding and Animal Feed Processing through Afrimart. If you prefer to send an enquiry by email, you can also contact [email protected].
Frequently asked questions
What is this diesel powered feed hammer mill machine used for?
It is used for grinding corn, maize, grains and straw into animal feed material. The machine is listed as a crusher, so its primary role is size reduction rather than complete feed manufacturing. It is suitable for farms, livestock operations and feed processing businesses that want to prepare feed on site.
What capacity does this feed grinding machine have?
The verified rated capacity is 1000 kg/h. Buyers should still confirm the basis of that figure, because throughput in grinding equipment can vary with the raw material and the target output size. A quotation should state whether the capacity applies to a specific grain type or a particular operating condition.
Can this machine work without electricity?
Yes. The product description states that it runs on diesel, so it is designed to operate without electrical power. That makes it relevant for agricultural sites where grid supply is unavailable or unreliable. Buyers should request the exact engine specification, starting method and fuel consumption data for the quoted unit.
What materials can it process?
The verified feed raw materials are grains and straw, and the product description specifically mentions corn and maize. If your operation uses a wider range of ingredients, ask Afrimart to confirm them in writing before ordering. That is important because published compatibility beyond the listed materials is not provided on the product page.
What output size does the machine produce?
The listing gives a stated output or pellet size range of 1–30 mm. Buyers should confirm how that output size is selected on the machine and whether any additional parts are needed to achieve the required feed texture. The product page does not explain the selection method in technical detail.
Does the machine need a special foundation?
The published installation requirement says no special foundation is needed. That can simplify deployment, but it does not remove the need for proper installation planning. Buyers should still confirm floor loading, anchoring, operating clearance, lifting access and any local safety requirements before the machine arrives on site.
What is included in the supplied machine?
The listing confirms 6 molds, 4 rollers and 6 blades included. It also identifies the machine as a single item sold with MOQ 1 set. Buyers should ask for a detailed packing list so they know exactly what is included, what is installed, and which wear parts or accessories may need to be purchased separately.
How do I request a quotation from Afrimart?
The best approach is to send Afrimart your required capacity, intended application, input materials, project country, available utilities, required accessories, and installation or training needs. Using the exact product name and Afrimart SKU 10000036642637 helps avoid confusion. Afrimart can then prepare a written quotation for the correct configuration.
Sources and technical review
Afrimart product page: Diesel Powered Feed Hammer Mill Machine for Corn Maize Grain Grinding and Animal Feed Processing
https://afrimart.co.za/product/diesel-powered-feed-hammer-mill-machine-for-corn-maize-grain-grinding-and-animal-feed-processing
International Chamber of Commerce (Incoterms guidance for FOB, EXW and CIF terminology)
https://iccwbo.org/business-solutions/incoterms-rules/
International Labour Organization, Encyclopaedia of Occupational Health and Safety (general machinery safety reference)
https://www.iloencyclopaedia.org/
