B21, China Town Mall, Midrand
Pressure Relief Valve Testing Equipment Calibration Safety Valve Setting Testing Machine
- Section : Consumer Electronics
- Category : Testing Equipment
- SKU : 1601198823423
Product Description
SAFETY VALVE CALIBRATOR
I.Introduction
The new safety valve calibration table developed and manufactured by our company is suitable for performance testing of setting pressure, return pressure and sealing of direct load type and pilot type safety valve.Related standards:TSGZF001-2006 safety valve safety technical inspection regulations,
GB-T12242-2005 pressure release device performance test specification, GB-T12241-2005 safety valve general requirements,
GB-T12243-2005 spring direct load safety valve, in line with safety valve performance test National standard
II.Features and features
1.Pneumatic clamping and air-driven hydraulic clamping device are used, the clamping force is adjustable, and a pressure gauge is displayed to show the corresponding clamping force. A comparison table of pressure and clamping force is provided to facilitate the operator to verify the pressure and communication according to the safety valve. Select the proper clamping force.
2.Gas test: Use nitrogen in a nitrogen cylinder as the test pressure source, pressurized by a pneumatic booster pump, and used for testing. Equipped with a gas booster pump, the driving air source is 2-8bar.
3.Liquid test: Use water as the test medium, pressurized by the pneumatic liquid booster pump, and used for the test test.
Equipped with an air-driven liquid booster pump,the booster medium is water, the driving air source is 2-8bar,.
4.All valves, fittings and joints are made of stainless steel.
5.In addition to the manual control of the check valve, the test process is computer operation, automatic clamping, automatic data recording, and printing of relevant data and pressure-time curve diagrams of the test process.
6. One sets of test and check bases, including oneclamp bases, for DN10-DN100 test use.
7. The computer adopts industrial computer, which has stable performance, shock resistance and firmness. During the verification operation, the appearance inspection status, the reason for the failure, and the maintenance status of the inspected safety valve can be selected, and it can be automatically imported into the inspection report of the verification task and automatically saved.
8. During the calibration process, the setting pressure can be automatically measured and recorded, and the three qualified setting pressure values and average values measured can be automatically imported into the verification report of the inspection task, with a pressure-time curve attached.
9. Equipped with multiple test fixtures to meet the test requirements of the safety valve of the checkered series.
Specification
| Model | MAQ-400 |
| Medium | gas+water |
| max.testing pressure | 600bar |
| max.testing valve range | DN400mm |
Packing & Delivery
To better ensure the safety of your goods, professional, environmentally friendly, convenient and efficient packaging services will be provided.
- Shipping Timeframes: All orders are processed within 2-5 business days (excluding weekends and holidays). After your order has been processed, the estimated delivery time is before 03 Feb, 2026, depending on customs, Please note that due to high demand, some items may experience longer shipping times, which will be communicated at order confirmation email.
- Order Processing Time: Please allow 2-5 business days for us to process your order before it is shipped . Orders placed after 16:00 on Fridays, or during weekends and public holidays, will begin processing on the next business day. Processing times may be extended during peak seasons or sales events.
- Manufacturing Time: Some products needs manufacturing time, the manufacturing process will take approximately 10-30 business days depending on the product. This timeframe may vary depending on the complexity of the product and current demand. but this will be communicated with you during order confirmation.
- Returns and Exchanges: We offer a 30-day return policy for most items. If you are not completely satisfied with your purchase, you may return it within 30 days of receipt for a refund or exchange. Items must be unused, in their original packaging, and accompanied by proof of purchase. Return shipping costs are the responsibility of the customer, unless the item was damaged or defective upon arrival.
1. What is the maximum testing pressure of the Pressure Relief Valve Testing Equipment?
The maximum testing pressure of the Pressure Relief Valve Testing Equipment is 600 bar.
2. What types of safety valves can this equipment test?
This equipment is suitable for performance testing of both direct load type and pilot type safety valves.
3. Is the testing process automated?
Yes, the testing process is automated, including automatic clamping, data recording, and printing of relevant data.
4. What materials are used for the valves and fittings in this equipment?
All valves, fittings, and joints are made of stainless steel for durability and corrosion resistance.
5. What standards does this equipment comply with?
The equipment complies with several standards including TSGZF001-2006 and GB-T12242-2005, among others.
6. How can the clamping force be adjusted?
The clamping force can be adjusted using a pneumatic clamping and air-driven hydraulic clamping device, with a pressure gauge for display.
7. What mediums can be used for testing?
The equipment can use both nitrogen gas for gas tests and water for liquid tests as testing mediums.
8. What type of computer is used in this testing machine?
The machine uses an industrial computer known for its stable performance, shock resistance, and firmness.
9. Can the setting pressure be automatically recorded?
Yes, during the calibration process, the setting pressure can be automatically measured and recorded.
10. What is included in the test and check bases?
The test and check bases include one clamp base suitable for DN10-DN100 testing.
11. How is the test data saved and reported?
The test data is automatically imported into the inspection report, including the pressure-time curve.
12. What is the driving air source range for tests?
The driving air source for both gas and liquid tests ranges from 2 to 8 bar.
13. Are there multiple test fixtures available?
Yes, the equipment comes equipped with multiple test fixtures to meet various testing requirements.
14. What safety measures are in place for packaging?
Professional, environmentally friendly, convenient, and efficient packaging services are provided to ensure the safety of your goods during delivery.
15. How can I contact support for this equipment?
You can contact our customer support team through our website or the contact information provided in the product manual.
Latest Order Arrivals
Discover our latest orders
12 Heads Embroidery Machine
Dewatering Pump Machine
Order Collection
Portable Water Drilling Rig
Order Usefully Collected
Batch of Orders
Agriculture Processing Machines
Meat Grinder Machine
Water Pump Equipment
Packaging Machine and accessories
Fabrics Manufacturing Equipment
Mining Equipments
Food Processing Machine
Batch of Orders
Batch of Orders
Latest Orders Labelled
wheel alignment machines
new arrivals
Pre Orders Offloading
Latest Arrivals
Latest Arrivals
