Key specs: 24V/100AH battery, 500W traction motor, two 350W brush motors, 400W water suction motor, cleaning width 700 mm, squeegee width 1000 mm, clean water tank 80 L, sewage tank 85 L, dimensions 1445 × 1000 × 1100 mm, weight 211 kg.
Typical cleaning productivity is up to approximately 3,650–4,000 m² per hour depending on site conditions, brush settings and operator speed.
Estimated run time is about 2–3 hours per full charge under normal working conditions (as specified). Actual runtime depends on operating mode, surface type and duty cycle.
Charge the battery with the compatible charger supplied or recommended by the manufacturer. Charging time depends on the charger and battery condition; consult the manual or supplier for the correct charger type and expected charge time.
Designed for hard indoor floors commonly found in industrial and commercial facilities, including concrete, tile, epoxy, sealed stone and similar non-carpeted surfaces.
Regular maintenance includes emptying and rinsing the sewage tank, cleaning the clean water tank and filters, inspecting and cleaning brushes and squeegee blades, checking battery electrolyte/terminals (if applicable), and following scheduled service in the user manual.
Common consumables: brush pads/brushes (700 mm), squeegee rubber strips (1000 mm), filters and fuses. Keep spare squeegee blades and brush sets for quick replacement to avoid downtime.
Yes. It includes a smart touch/control panel, an emergency stop switch and easy-to-access controls to ensure safe operation. Refer to the operator manual for full safety procedures.
The clean water tank holds 80 L and the sewage tank holds 85 L. Frequency of refilling/emptying depends on the size of the area being cleaned and chosen settings, but large capacities minimize interruptions during typical shifts.
Yes. The K70 offers a three-in-one function: brushing, scrubbing and drying (water pickup) in a single pass using dual brush motors and the squeegee system.
Overall dimensions are 1445 mm (length) × 1000 mm (width) × 1100 mm (height). The machine weighs 211 kg; plan for appropriate lifting/transport arrangements or a ramp for vehicle loading.
The unit is equipped with a dedicated water suction motor (spec listed at 400W) and a full-width 1000 mm squeegee for effective water pickup. Performance will depend on squeegee condition and surface profile.
Warranty terms, authorized service centers and parts ordering are provided by the manufacturer or your CHANCEE dealer. Contact your supplier or consult the product documentation for warranty coverage and service contacts.
Discover our latest orders