B21, China Town Mall, Midrand
500kg ribbon mixer Full SUS304 material for food processing
- Section : Machinery
- Category : Other Food Processing Machinery
- SKU : 1600885208365
Product Description
Horizontal ribbon mixer is widely used in chemical, pharmaceuticals, food, and Construction line. Under the driven of motor, the double ribbon agitator mix the material quickly
1. Bearing is on both ends of the mixer, the material is not easy to enter, repair rate is low.
2. Gear box drive the auger shaft, simple maintenance, high efficiency, save both time and labor.
3. U-Shape tank bottom, easy operate, stir uniformly, no dead angle, better for material discharge and cleaning.
4. Under the bottom or the sides of the tank , there is a flap dome valve (pneumatic control or manual control) of the center. The valve is arc design to make sure no material deposit and no dead angle when mixing. There is a lid and fence on the top of the tank, it seals the tank well, so that no powder will come out during mixing
- Shipping Timeframes: All orders are processed within 2-5 business days (excluding weekends and holidays). After your order has been processed, the estimated delivery time is before 03 Feb, 2026, depending on customs, Please note that due to high demand, some items may experience longer shipping times, which will be communicated at order confirmation email.
- Order Processing Time: Please allow 2-5 business days for us to process your order before it is shipped . Orders placed after 16:00 on Fridays, or during weekends and public holidays, will begin processing on the next business day. Processing times may be extended during peak seasons or sales events.
- Manufacturing Time: Some products needs manufacturing time, the manufacturing process will take approximately 10-30 business days depending on the product. This timeframe may vary depending on the complexity of the product and current demand. but this will be communicated with you during order confirmation.
- Returns and Exchanges: We offer a 30-day return policy for most items. If you are not completely satisfied with your purchase, you may return it within 30 days of receipt for a refund or exchange. Items must be unused, in their original packaging, and accompanied by proof of purchase. Return shipping costs are the responsibility of the customer, unless the item was damaged or defective upon arrival.
1. What is the capacity of this ribbon mixer?
The nominal batch capacity is 500 kg (depends on material bulk density). For best mixing performance we typically recommend filling the mixer to about 50–70% of its total volume—contact us with your material bulk density for an exact usable volume.
2. What material is the machine constructed from?
The machine is constructed entirely from SUS304 stainless steel, suitable for food processing applications and offering good corrosion resistance and cleanability.
3. Is this ribbon mixer suitable for food-grade applications?
Yes. The SUS304 construction, smooth U‑shape tank bottom, arc discharge valve and sealed top lid are designed for food processing. Additional hygienic finishes and certifications (GMP, 3-A) can be provided on request.
4. How does the double ribbon agitator work and why is it used?
The double ribbon agitator produces both inward and outward material flow—outer ribbon moves material toward ends and inner ribbon moves it toward the center—resulting in fast, uniform mixing suitable for powders and powder/solid blends.
5. What is the typical mixing time?
Mixing time depends on material properties and fill level; most formulations reach homogeneity in about 5–15 minutes. We recommend running trials with your product to determine the exact cycle.
6. How is the mixer driven and what about maintenance?
The ribbon shaft is driven by a gearbox and motor. Bearings are located at both ends to reduce material ingress and extend life. Regular maintenance includes gearbox oil checks, bearing inspections, and seal checks—simple and low-maintenance design.
7. What type of discharge valve does it have and how effective is discharge?
It uses a centrally located flap/dome discharge valve (pneumatic or manual) with an arc design to prevent material build-up. The U‑shaped tank bottom and valve design provide efficient, near-complete discharge and easy cleaning.
8. Can the discharge valve be pneumatic or manual?
Yes. The discharge valve can be supplied with pneumatic actuation or a manual handle according to your preference and process requirements.
9. How easy is the machine to clean (CIP capability)?
The U‑shaped bottom, smooth SUS304 interior and arc valve minimize dead zones and facilitate cleaning. Clean-in-place (CIP) systems or spray balls can be integrated on request; otherwise the design allows straightforward manual cleaning and inspection.
10. What sanitary features and seals are included to prevent contamination?
Standard features include a tight top lid with a protective fence, shaft bearings positioned to limit material ingress, and a valve designed to avoid residue. Food-grade gasket and sealing options, and hygienic shaft seals, can be supplied if required.
11. What power supply and motor options are available?
Motor size depends on batch weight and material characteristics. We commonly supply three-phase motors for industrial voltages (e.g., 380–415 V) and can provide other voltages or explosion-proof motors on request. Contact us with your local supply and material details for exact sizing.
12. Can the mixer be customized (size, finish, controls)?
Yes. We can customize tank volume, ribbon geometry, surface finish (polished, electropolished), control panels (manual, PLC, timed cycles), CIP, and safety/interlock options to match your process requirements.
13. What certifications, documentation and validation support do you provide?
We can supply material certificates for SUS304, QC inspection reports, welding and NDT documentation on request. Food hygiene certifications (GMP/3-A) and conformity documents (CE) can be provided where applicable—please request at order stage.
14. What installation and space requirements are needed?
The mixer is floor-mounted and should be installed on a level, load-bearing surface with sufficient clearance for the lid, feed and discharge connections, and servicing. Exact footprint and weight details are provided on the quotation drawing.
15. What spare parts and after-sales support are available?
We supply common spare parts such as seals, bearings, ribbons and gearboxes. Preventative maintenance guidance and parts lists are provided, and technical support is available for installation, commissioning and troubleshooting.
Latest Order Arrivals
Discover our latest orders
12 Heads Embroidery Machine
Dewatering Pump Machine
Order Collection
Portable Water Drilling Rig
Order Usefully Collected
Batch of Orders
Agriculture Processing Machines
Meat Grinder Machine
Water Pump Equipment
Packaging Machine and accessories
Fabrics Manufacturing Equipment
Mining Equipments
Food Processing Machine
Batch of Orders
Batch of Orders
Latest Orders Labelled
wheel alignment machines
new arrivals
Pre Orders Offloading
Latest Arrivals
Latest Arrivals
