B21, China Town Mall, Midrand
Woodworking furniture production line suitable for 300m2
- Section : Machinery
- Category : Woodworking Machinery
- SKU : 1600589951686
PRODUCT INFORMATION
Characteristics
●The production line is suitable for some medium-sized and large furniture factories.
●Space requirement is about 10(Width)x 20(Length)square meters, about 200㎡.
●This production line can reach up to 100-120 pieces standard size board(1220*1440 mm ) within 8 hours, which could improve working efficiency.
●Optimize the software to improve the utilization rate of plate and save cost
●Only 5-6workers are needed, saving labor costs.
●High return on investment
●Used in kitchen furniture, office furniture and other furnitures.Description
Description
This automation solutions tailor-made furniture production line is very suitable for some medium-sized and large factories. If youwant to improve production and efficiency, we believe this production line will be your best choice.
For this production line, you can use it for processing ordinary furniture. Such as desks, cabinets, wardrobes and office
furniture. Each model of this production line is very easy to operate, you only need 5 inexperienced workers. This product line is equipped with optimization software to provide you with customized design, which is more intelligent.
PARAMETER INFORMATION
1. Wood CNC Cutting machine
The machine is widely used in furniture processing industry, home decoration, wooden doors manufacturing,suitable for large panel cutting and large relief carcving products.
*Model：CR4
*X Working Area：1300mm
*Y Working Area：2500mm
*Z Working Area：250mm
*Spindle：JST 9kw 18000r/min air-cooled spindle
*Carving speed：30m/min
2. Edge banding machine
After the board is cutted, the wooden material on the side and the glue used for bonding will be exposed. It is necessary to give protective treatment to the side of the plate.
*Model：MF50F
*Panel Length：Min.150mm
*Panel Thickness：10-60mm
*Edge Thickness：0.4-3mm
*Feeding Speed：15-23m/min
*Total Power：16.5kw
3. CNC Sides Drilling Machine
Mainly used for drilling and grooving of panel furniture. It can process common panel furniture two-inone and three-in-one connector installation holes; at the same time, it can realize panel grooving, milling, and process standard panel and special-shaped panel.
*Model：C6
*Main spindle power：3.5kw/18000rpm
*Upper Drilling model：12V+8H
*Lower Drilling model：9V
*Maximum processing size：Width 1220mm
*Minimum processing size：45x180mm
4. Double Row Drill machine
With multiple drill bits, without grooving.Before processing, you can adjust the drilling position according to the size of the plate.
*Model：MZ2
*Manimum drilling diameter：35mm
*Manimum drilling depth：60mm
*Number of auger shaft：21*2
*Rotation speed：2800r/min
*Motor power：1.5*2kw
- Shipping Timeframes: All orders are processed within 2-5 business days (excluding weekends and holidays). After your order has been processed, the estimated delivery time is before 03 Feb, 2026, depending on customs, Please note that due to high demand, some items may experience longer shipping times, which will be communicated at order confirmation email.
- Order Processing Time: Please allow 2-5 business days for us to process your order before it is shipped . Orders placed after 16:00 on Fridays, or during weekends and public holidays, will begin processing on the next business day. Processing times may be extended during peak seasons or sales events.
- Manufacturing Time: Some products needs manufacturing time, the manufacturing process will take approximately 10-30 business days depending on the product. This timeframe may vary depending on the complexity of the product and current demand. but this will be communicated with you during order confirmation.
- Returns and Exchanges: We offer a 30-day return policy for most items. If you are not completely satisfied with your purchase, you may return it within 30 days of receipt for a refund or exchange. Items must be unused, in their original packaging, and accompanied by proof of purchase. Return shipping costs are the responsibility of the customer, unless the item was damaged or defective upon arrival.
1. What is the space requirement for the woodworking furniture production line?
The production line requires approximately 10 meters in width and 20 meters in length, totaling about 200 square meters.
2. How many pieces of furniture can the production line produce in a day?
The production line can produce up to 100-120 standard size boards (1220*1440 mm) within 8 hours.
3. How many workers are needed to operate this production line?
Only 5-6 workers are needed to operate this production line, which helps in saving labor costs.
4. What types of furniture can be produced with this line?
This production line is suitable for processing various types of furniture including kitchen furniture, office furniture, desks, cabinets, and wardrobes.
5. What software is included with the production line?
The production line is equipped with optimization software that improves plate utilization and allows for customized design, enhancing overall efficiency.
6. What is the return on investment for this production line?
The production line offers a high return on investment due to its efficiency and reduced labor costs.
7. Can inexperienced workers operate this production line?
Yes, the production line is designed to be user-friendly, allowing even inexperienced workers to operate it effectively.
8. What machines are included in the production line?
The production line includes a Wood CNC Cutting machine, Edge banding machine, CNC Sides Drilling Machine, and a Double Row Drill machine.
9. What is the carving speed of the CNC Cutting machine?
The carving speed of the CNC Cutting machine is 30 meters per minute.
10. What is the minimum and maximum panel thickness for the Edge banding machine?
The Edge banding machine can process panels with a thickness ranging from 10mm to 60mm.
11. What is the maximum processing size for the CNC Sides Drilling Machine?
The maximum processing size for the CNC Sides Drilling Machine is 1220mm in width.
12. How can I adjust the drilling position on the Double Row Drill machine?
You can adjust the drilling position on the Double Row Drill machine according to the size of the plate before processing.
13. What is the power requirement for the Edge banding machine?
The total power requirement for the Edge banding machine is 16.5 kW.
14. Is this production line suitable for small furniture factories?
This production line is designed for medium-sized and large furniture factories, as it is optimized for higher production volumes.
15. Does the production line require special maintenance?
Regular maintenance is recommended to ensure optimal performance, but no special maintenance is required beyond standard operational practices.
Latest Order Arrivals
Discover our latest orders
12 Heads Embroidery Machine
Dewatering Pump Machine
Order Collection
Portable Water Drilling Rig
Order Usefully Collected
Batch of Orders
Agriculture Processing Machines
Meat Grinder Machine
Water Pump Equipment
Packaging Machine and accessories
Fabrics Manufacturing Equipment
Mining Equipments
Food Processing Machine
Batch of Orders
Batch of Orders
Latest Orders Labelled
wheel alignment machines
new arrivals
Pre Orders Offloading
Latest Arrivals
Latest Arrivals
