B21, China Town Mall, Midrand
Coal Mine Wagon MLC Material Transport Convey Car Underground Mining Material Mine
- Section : Machinery
- Category : Mining Machinery
- SKU : 1600863992838
PRODUCT DESCRIPTION
MLC Material Supply Mine Cart
One or both sides of the mining cart body can be opened, and the mining cart can be tilted with the help of the unloading track installed on the unloading point. The pull rod opens the side door for unloading. The trunk has a large volume and high efficiency, which is named after the frequent shuttling between vehicles. The bottom plate of the material cart body is opened and unloaded backwards or to one side using gravity.
There is a rim on the inner side of the wheels of the mining material cart, and there is a certain gap between the rim and the steel rail. The tread of the wheel in contact with the steel rail is made into a cone to maintain the alignment of the wheel set during operation along the track, reduce mechanical wear, and reduce running resistance.
Model | Loading
/t
| Garuge G (mm) | Overall Dia（mm） |
Wheel Base
C
| Wheel Dia
D
| Traction
Height h
| Rated
Traction/ KN
| ||
| Length L | Width B | Height H | |||||||
| MLC2-6 | 2 | 600 | 2000 | 880 | 1150 | 550 | 300 | 320 | 60 |
| MLC3-6 | 3 | 600 | 2400 | 1050 | 1200 | 750 | 300 | 320 | 60 |
| MLC5-6 | 5 | 600 | 3450 | 1200 | 1200 | 1100 | 350 | 320 | 60 |
| MLC5-9 | 5 | 600 | 3450 | 1320 | 1300 | 1100 | 350 | 320 | 60 |
| MLC3-9A | 5 | 600 | 2100 | 1150 | 1300 | 600 | 350 | 270 | 60 |
PRODUCT ADVANTAGE
The wear of the pin shaft of the chain link that bears traction force shall not exceed 15% of the original size, and the bending value of the chain link pin shall not exceed 10% of the diameter.
Cast steel joints shall not show cracks, and buffer springs shall not break or undergo permanent deformation.
The material carts should run smoothly, and the difference in tread diameter between two wheels of the same wheelset should not exceed 2 mm; When one of the four main wheels of the same material vehicle does not contact the rail surface on a flat track, the gap should not exceed 2 mm. Otherwise, it is necessary to immediately stop running and carry out repairs or adjustments.
The wheels shall not have cracks, and the excess thickness of wheel flange wear shall not be less than 13 mm, and the excess thickness of tread shall not be less than 7 mm.
The wheels should be oiled every two weeks, and new oil must be used to top out the old oil.
The steering device is flexible and reliable, and should rotate flexibly in both horizontal and vertical directions.
MAIN PRODUCT
- Shipping Timeframes: All orders are processed within 2-5 business days (excluding weekends and holidays). After your order has been processed, the estimated delivery time is before 03 Feb, 2026, depending on customs, Please note that due to high demand, some items may experience longer shipping times, which will be communicated at order confirmation email.
- Order Processing Time: Please allow 2-5 business days for us to process your order before it is shipped . Orders placed after 16:00 on Fridays, or during weekends and public holidays, will begin processing on the next business day. Processing times may be extended during peak seasons or sales events.
- Manufacturing Time: Some products needs manufacturing time, the manufacturing process will take approximately 10-30 business days depending on the product. This timeframe may vary depending on the complexity of the product and current demand. but this will be communicated with you during order confirmation.
- Returns and Exchanges: We offer a 30-day return policy for most items. If you are not completely satisfied with your purchase, you may return it within 30 days of receipt for a refund or exchange. Items must be unused, in their original packaging, and accompanied by proof of purchase. Return shipping costs are the responsibility of the customer, unless the item was damaged or defective upon arrival.
1. What is the load capacity of the MLC Material Transport Convey Car?
The load capacity of the MLC Material Transport Convey Car varies by model, with options ranging from 2,000 kg to 6,500 kg.
2. How does the unloading mechanism work?
The mining cart can be unloaded by tilting it with the help of an unloading track. A pull rod opens the side door for unloading, allowing materials to exit either backwards or to one side using gravity.
3. What materials can be transported using this cart?
The MLC Material Transport Convey Car is designed for transporting various materials used in underground mining operations, including ores, coal, and other bulk materials.
4. What is the advantage of the cone-shaped wheel tread?
The cone-shaped wheel tread helps maintain alignment during operation along the track, reduces mechanical wear, and decreases running resistance.
5. How often should the wheels be lubricated?
The wheels should be oiled every two weeks, and it is essential to use new oil to top out the old oil.
6. What maintenance is required for the chain link pin?
The wear of the pin shaft of the chain link should not exceed 15% of its original size, and the bending value should not exceed 10% of the diameter.
7. Are there safety features in the design of this cart?
Yes, the design includes features to ensure smooth operation, such as maintaining tread diameter differences within 2 mm and ensuring that wheels do not have cracks.
8. What should be done if a wheel does not contact the rail surface?
If one of the four main wheels does not contact the rail surface on a flat track, you should immediately stop the cart and perform necessary repairs or adjustments.
9. What are the dimensions of the cart?
Dimensions vary by model; for example, the MLC2-6 model has a length of 800 mm, width of 550 mm, and height of 300 mm.
10. Can both sides of the cart be opened for unloading?
Yes, one or both sides of the mining cart body can be opened for unloading, providing flexibility in operation.
11. What type of materials are the wheels made from?
The wheels are typically made from durable materials like cast steel to ensure longevity and resistance to wear.
12. How is the steering mechanism designed?
The steering device is designed to be flexible and reliable, allowing for smooth rotation in both horizontal and vertical directions.
13. What is the maximum bending value allowed for the chain link pin?
The maximum bending value for the chain link pin should not exceed 10% of the diameter.
14. Is there a warranty on the MLC Material Transport Convey Car?
Warranty details may vary by manufacturer; please check with the supplier for specific warranty information.
15. How can I order replacement parts for the cart?
Replacement parts can typically be ordered through the manufacturer or authorized dealers. Please consult the product manual for specific part numbers.
Latest Order Arrivals
Discover our latest orders
12 Heads Embroidery Machine
Dewatering Pump Machine
Order Collection
Portable Water Drilling Rig
Order Usefully Collected
Batch of Orders
Agriculture Processing Machines
Meat Grinder Machine
Water Pump Equipment
Packaging Machine and accessories
Fabrics Manufacturing Equipment
Mining Equipments
Food Processing Machine
Batch of Orders
Batch of Orders
Latest Orders Labelled
wheel alignment machines
new arrivals
Pre Orders Offloading
Latest Arrivals
Latest Arrivals
