Products Description

TONGDA AUTOMATIC WINE AND LIQUOR BOTTLING LINE MACHINE

We are fatory to make liquid bottling filling line machines, and the speed of each module of the filling line can be made based on customer's requirement. More info pls contact Denise at:

Mobile/wechat/whatsapp: 0086-13863682769

E-mail: [email protected]

Filling Feature

1. The tolerance of filling liquid level is below 2mm,better than the industry standard.
2. The advanced technology of frequency conversion speed regulation is adopted on the machine,and the largest filling volume will get to 200-300 bottles per hour.
3. Bottle height is from 140-340mm,easy to adjust.
4. Tight seal,and it does not fill if there is no bottle or bottle broken.Liquid flows down along the inner wall of the
botlle,effectively control of the foam and spill.
5. It is widely used for red wine,fruit wine,yellow wine,sauce-soy,vinegar etc.
6.The spiral bottle arranging device ensures the safety of the bottle-feed-in.

12 heads filling machine

1.With glass housing to protect
2.With CIP cleaning system
3.With pump for auto-liquids-supplying
4.With conveyor line easily working
5.With filling valve for the same liquid-level

1. Accurate filling liquid level

2. High working efficiency
3. Large range of bottle adjustment
4. No liquid loss,no drip dropped
5. Large range of applicaton
6.Free bottle-feed-in
 

12 heads filling machine

There is bottle feeding in Screws and Starwheels which make bottle moves steadily.

Filling Valves with new Design

Low vacuum filler is recommended for still,non dense liquids such as still water,wine,alcoholic beverage

(whiskey, vodka, brandy etc) and any kinds of flat non viscous liquids.In this case,the opening of the filling valve is given by the neck finish of the containers,lifted by the mechanical plates of the filler. wine,alcohol beverage automatic filling machine with high precision.

Filling line for test before shipping

Filling line show

We can make the full wine filling line including wine bottle washing filling corking capping shrinking labeling machines etc.

Filling Samples Application

Liquor Wine bottle

Milk bottle

Juice bottle

Filling Parameter

1.Monoblock of Rinser Filler Capper/Corker

1. High efficiency to get to 2000 bph capacity.

2. Large application range.

3. To keep the same liquid filling level.

4. No bottle leakage.

5. No bottle no sealing.

2. Washing Machine for reference

1. Rinse thoroughly-bottle inside and outside clean by water or chemical liquids.

2. Adapt to bottle type,It is suitable for various bottle types with wine bottle height 140-300mm and bottleneck ɸ25mm-ɸ100mm.

3. Water saving: Equipped with a circulating water tank, which is used after water filtration to reduce water consumption.

4. Wide adaptability.

3. T-cap Corking Machine for reference

1.Mainly used for T-cork cap in glass bottles.2. There is push-down part before capping.3.Equipped with T-cap feeding device, automatic arranging corks, labor saving and reliable.4.Equipped with photoelectric sensor system, no bottle no cork.

4. Aluminum Capping Machine for refrence

1. The capper is suitable for aluminum screw caps: ropp cap and stelvin caps.

2.We also can make 4 heads for 4000bph capacity, 6 heads capper for 6000bph capacity, 8 heads capper for 8000bph capacity, 12 heads capper for 12000bph capacity etc.

3. This capper can be customized based on customer's requirement.

45 Automatic Corking Machine for reference

1.Mainly used for T-cork cap in glass bottles. 2.The shrinkage cork mechanism adopts an independent squeeze head to ensure the
smooth progress of the cork. 3.Equipped with arranging device, automatic arranging corks, labor saving and reliable. 4.Equipped
with photoelectric sensor system, no bottle no cork.

6. Automatic Shrinker & Grinder part for reference
 

1.Rolling cap completed at one time, smooth and firm, and has wrinkle-free appearance, good sealing effect and high efficiency.2. The power & the dial system are equipped with a buffer overload protection device.3. The rapid structure of the bottle dial star wheel, the bottle mouth is equipped with an automatic positioning device.
 

7.The labeling part

1.Adopts the original pneumatic roller structure.2. High repeat accuracy, no bubbles when labeling3. This machine is especially suitable for high-requirement all-round labeling.4. One or two labels can be selected for one-time labeling.5. Real man-machine interaction, simple operation, online help information.