The ATV is powered by a 200cc single-cylinder, 4-stroke, air-cooled engine with a compression ratio of 10.0:1.
Maximum power is listed as 12 kW at approximately 6500 ±100 rpm. Maximum torque is listed as 17.5 (units shown in the spec) at approximately 5500 ±100 rpm — commonly interpreted as 17.5 N·m.
The specification shows 'Gas / Diesel'. Many 200cc single-cylinder 4‑stroke ATVs run on gasoline, but the listing indicates there may be a gas or diesel variant — confirm the exact fuel type with the seller.
There is conflicting information: the product name states 'Manual Transmission' while the specs list 'Transmission Type: Automatic'. Confirm with the vendor which transmission variant (manual or automatic) you will receive.
The ATV uses a chain drive transmission system for final drive. Exact gearbox details (number of gears, clutch type) are not specified in the listing — please confirm with the seller.
The electrical system voltage is listed as 12V, which usually indicates an electric start with a battery. The listing does not explicitly confirm electric or kick start — verify with the seller.
Yes, the specification includes CE certification.
The listing specifies a 12V electrical system. For battery capacity, fuse ratings and accessory wiring details, check the detailed manual or ask the vendor.
Regular chain maintenance is recommended: clean and degrease the chain, check and adjust chain tension, and lubricate with appropriate chain lube at regular intervals. Follow the owner's manual for service frequency.
The engine is air-cooled according to the specifications.
Tire, rim sizes and brake types are not specified in the provided listing. Ask the seller or request a spec sheet for exact wheel and brake details.
Payload and towing capacities are not listed in the provided specifications. These figures vary by model and configuration; request the manufacturer's load and towing ratings from the seller.
The listing does not include service intervals. As a general guideline for 4‑stroke ATVs: change engine oil and oil filter per the owner's manual (commonly every 300–1,000 km depending on use), inspect/replace air filter and spark plug periodically, and perform valve/drive checks as recommended by the manufacturer. Verify intervals in the supplied manual.
The provided specification does not mention warranty or after-sales support. Contact the seller or manufacturer (Brand: KNL) to confirm warranty length, coverage details and local service options.
Discover our latest orders